Medium/high density fibreboard (MDF/HDF) — Production in Czechia
Czechia: Medium/high density fibreboard (MDF/HDF) — Production was 40,000 m3 in 2024. ▼ Falling
Medium/high density fibreboard (MDF/HDF) — Production in Czechia, 1995–2024
Source: Food and Agriculture Organization of the United Nations. Measured in m3.
Analysis
In 2024, medium/high density fibreboard (mdf/hdf) — production in Czechia stood at 40,000 m3.
Compared with earlier readings it is up 33.3% over ten years.
Over the whole period, medium/high density fibreboard (mdf/hdf) — production in Czechia peaked at 94,000 m3 in 2007 and was at its lowest, 28,900 m3, in 2011.
That places Czechia 52nd out of 90 countries with data for 2024, putting it in the middle of the range.
The long-run direction has been consistently falling across the 30 years of available data.
Medium/high density fibreboard (MDF/HDF) — Production in Czechia, year by year
| Year | m3 | Change |
|---|---|---|
| 1995 | 60,000 m3 | — |
| 1996 | 63,000 m3 | +5.0% |
| 1997 | 66,000 m3 | +4.8% |
| 1998 | 69,000 m3 | +4.5% |
| 1999 | 70,000 m3 | +1.4% |
| 2000 | 75,000 m3 | +7.1% |
| 2001 | 75,000 m3 | +0.0% |
| 2002 | 82,000 m3 | +9.3% |
| 2003 | 88,000 m3 | +7.3% |
| 2004 | 90,000 m3 | +2.3% |
| 2005 | 90,000 m3 | +0.0% |
| 2006 | 90,000 m3 | +0.0% |
| 2007 | 94,000 m3 | +4.4% |
| 2008 | 80,000 m3 | -14.9% |
| 2009 | 44,000 m3 | -45.0% |
| 2010 | 46,000 m3 | +4.5% |
| 2011 | 28,900 m3 | -37.2% |
| 2012 | 29,000 m3 | +0.3% |
| 2013 | 29,000 m3 | +0.0% |
| 2014 | 30,000 m3 | +3.4% |
| 2015 | 32,000 m3 | +6.7% |
| 2016 | 32,000 m3 | +0.0% |
| 2017 | 33,000 m3 | +3.1% |
| 2018 | 34,000 m3 | +3.0% |
| 2019 | 42,396 m3 | +24.7% |
| 2020 | 42,800 m3 | +1.0% |
| 2021 | 45,000 m3 | +5.1% |
| 2022 | 41,000 m3 | -8.9% |
| 2023 | 40,000 m3 | -2.4% |
| 2024 | 40,000 m3 | +0.0% |
Czechia compared with similar countries
- Czechia's 40,000 m3 is below the median for high income countries, which is 134,888 m3, 30% of the median. (41 countries reporting)
- Czechia's 40,000 m3 is above the median for Europe & Central Asia, which is 15,607 m3, 2.6× the median. (48 countries reporting)
Biggest year-on-year movements
Years where Medium/high density fibreboard (MDF/HDF) — Production in Czechia changed far more than this series normally does. A large move can be a real event or a change in how the figure was measured — the source note below says who published it.
| Year | Change | From | To |
|---|---|---|---|
| 2009 | -45.0% | 80,000 m3 | 44,000 m3 |
| 2011 | -37.2% | 46,000 m3 | 28,900 m3 |
Averages by decade
| Decade | Average | Lowest | Highest | Years |
|---|---|---|---|---|
| 1990s | 65,600 m3 | 60,000 m3 | 70,000 m3 | 5 |
| 2000s | 80,800 m3 | 44,000 m3 | 94,000 m3 | 10 |
| 2010s | 33,630 m3 | 28,900 m3 | 46,000 m3 | 10 |
| 2020s | 41,760 m3 | 40,000 m3 | 45,000 m3 | 5 |
Countries ranked near Czechia
More environment data for Czechia
- Historical exposure to drought — Land soil moisture anomaly -2.82 Percentage change (2025)
- Historical exposure to drought — Cropland soil moisture anomaly -2.99 Percentage change (2025)
- Standard Deviation, annual growth rate 0 % change on previous year (2025)
- Standard Deviation 0.63 °C (2025)
- Temperature change 1.97 °C (2025)
- Wood-based panels — Production, annual growth rate -0.4193 % change on previous year (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), annual -7.77 % change on previous year (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), per unit 0 Mt CO2e per US$ of GDP (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), per capita 0 Mt CO2e per person (2024)
- Methane (CH4) emissions from Agriculture (Mt CO2e), annual growth rate -0.1206 % change on previous year (2024)
Frequently asked questions
- What is medium/high density fibreboard (mdf/hdf) — production in Czechia?
- Medium/high density fibreboard (mdf/hdf) — production in Czechia was 40,000 m3 in 2024, according to Food and Agriculture Organization of the United Nations.
- What is the highest medium/high density fibreboard (mdf/hdf) — production recorded in Czechia?
- The highest recorded value was 94,000 m3 in 2007.
- What is the lowest medium/high density fibreboard (mdf/hdf) — production recorded in Czechia?
- The lowest recorded value was 28,900 m3 in 2011.
- How does Czechia rank for medium/high density fibreboard (mdf/hdf) — production?
- Czechia ranks 52nd out of 90 countries with data for 2024.
- Is medium/high density fibreboard (mdf/hdf) — production rising or falling in Czechia?
- Over the last ten years it is up 33.3%. The long-run trend across the full record is falling.
- Where does this Czechia data come from?
- The figures come from Food and Agriculture Organization of the United Nations, published as part of Medium/high density fibreboard (MDF/HDF) — Production. Statizoid updates them automatically from the source API.
Download this data
CSV · JSON — 30 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).
About this data
The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en