Total FAO — Veneer sheets — Import Quantity in Australia
Australia: Total FAO — Veneer sheets — Import Quantity was 12,148 m3 in 2018. ▼ Falling
Total FAO — Veneer sheets — Import Quantity in Australia, 1997–2018
Source: Food and Agriculture Organization of the United Nations. Measured in m3.
Analysis
The most recent figure for total fao — veneer sheets — import quantity in Australia is 12,148 m3, measured in 2018.
That represents a change of down 16.6% on the previous year and down 70.6% over ten years.
Over the whole period, total fao — veneer sheets — import quantity in Australia peaked at 41,300 m3 in 2007 and was at its lowest, 6,357 m3, in 2014.
That places Australia 39th out of 158 countries with data for 2018, putting it in the top quarter.
The long-run direction has been consistently falling across the 22 years of available data.
Total FAO — Veneer sheets — Import Quantity in Australia, year by year
| Year | m3 | Change |
|---|---|---|
| 1997 | 17,700 m3 | — |
| 1998 | 22,000 m3 | +24.3% |
| 1999 | 19,000 m3 | -13.6% |
| 2000 | 16,000 m3 | -15.8% |
| 2001 | 15,000 m3 | -6.2% |
| 2002 | 17,000 m3 | +13.3% |
| 2003 | 20,680 m3 | +21.6% |
| 2004 | 19,000 m3 | -8.1% |
| 2005 | 19,000 m3 | +0.0% |
| 2006 | 21,000 m3 | +10.5% |
| 2007 | 41,300 m3 | +96.7% |
| 2008 | 41,300 m3 | +0.0% |
| 2009 | 15,000 m3 | -63.7% |
| 2010 | 13,000 m3 | -13.3% |
| 2011 | 19,000 m3 | +46.2% |
| 2012 | 14,655 m3 | -22.9% |
| 2013 | 14,655 m3 | +0.0% |
| 2014 | 6,357 m3 | -56.6% |
| 2015 | 27,348 m3 | +330.2% |
| 2016 | 14,145 m3 | -48.3% |
| 2017 | 14,558 m3 | +2.9% |
| 2018 | 12,148 m3 | -16.6% |
Australia compared with similar countries
- Australia's 12,148 m3 is above the median for high income countries, which is 7,036 m3, 1.7× the median. (51 countries reporting)
- Australia's 12,148 m3 is above the median for East Asia & Pacific, which is 3,037 m3, 4.0× the median. (20 countries reporting)
Biggest year-on-year movements
Years where Total FAO — Veneer sheets — Import Quantity in Australia changed far more than this series normally does. A large move can be a real event or a change in how the figure was measured — the source note below says who published it.
| Year | Change | From | To |
|---|---|---|---|
| 2015 | +330.2% | 6,357 m3 | 27,348 m3 |
Averages by decade
| Decade | Average | Lowest | Highest | Years |
|---|---|---|---|---|
| 1990s | 19,567 m3 | 17,700 m3 | 22,000 m3 | 3 |
| 2000s | 22,528 m3 | 15,000 m3 | 41,300 m3 | 10 |
| 2010s | 15,096 m3 | 6,357 m3 | 27,348 m3 | 9 |
Countries ranked near Australia
More environment data for Australia
- Historical exposure to drought — Land soil moisture anomaly -4.75 Percentage change (2025)
- Historical exposure to drought — Cropland soil moisture anomaly -5.98 Percentage change (2025)
- Standard Deviation, annual growth rate 0 % change on previous year (2025)
- Standard Deviation 0.345 °C (2025)
- Temperature change 1.4 °C (2025)
- Wood-based panels — Production, annual growth rate -1.03 % change on previous year (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), annual 0.6708 % change on previous year (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), per unit 0 Mt CO2e per US$ of GDP (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), per capita 0 Mt CO2e per person (2024)
- Methane (CH4) emissions from Agriculture (Mt CO2e), annual growth rate 0.0861 % change on previous year (2024)
Frequently asked questions
- What is total fao — veneer sheets — import quantity in Australia?
- Total fao — veneer sheets — import quantity in Australia was 12,148 m3 in 2018, according to Food and Agriculture Organization of the United Nations.
- What is the highest total fao — veneer sheets — import quantity recorded in Australia?
- The highest recorded value was 41,300 m3 in 2007.
- What is the lowest total fao — veneer sheets — import quantity recorded in Australia?
- The lowest recorded value was 6,357 m3 in 2014.
- How does Australia rank for total fao — veneer sheets — import quantity?
- Australia ranks 39th out of 158 countries with data for 2018.
- Is total fao — veneer sheets — import quantity rising or falling in Australia?
- Over the last ten years it is down 70.6%. The long-run trend across the full record is falling.
- Where does this Australia data come from?
- The figures come from Food and Agriculture Organization of the United Nations, published as part of Total FAO — Veneer sheets — Import Quantity. Statizoid updates them automatically from the source API.
Download this data
CSV · JSON — 22 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).
About this data
The database contains data on the bilateral trade flows in roundwood, primary wood and paper products for all countries and territories in the world. The main types of primary forest products included in are: roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further. The definitions are available. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/forestry/statistics/80572/en/