Veneer sheets — Export quantity in France

France: Veneer sheets — Export quantity was 58,052 m3 in 2024. ▲ Rising

Latest (2024)
58,052 m3
Change on year
up 5.2%
World rank
26th
of 250 countries
All-time high
103,102 m3
in 2018
All-time low
17,983 m3
in 2009
Years of data
64
1961–2024

Veneer sheets — Export quantity in France, 1961–2024

20.0k40.0k60.0k80.0k100.0k196119922024

Source: Food and Agriculture Organization of the United Nations. Measured in m3.

Analysis

France recorded 58,052 m3 for veneer sheets — export quantity in 2024.

Compared with earlier readings it is up 5.2% on the previous year and down 16.0% over ten years.

Over the whole period, veneer sheets — export quantity in France peaked at 103,102 m3 in 2018 and was at its lowest, 17,983 m3, in 2009.

That places France 26th out of 250 countries with data for 2024, putting it in the top quarter.

The long-run direction has been consistently rising across the 64 years of available data.

Veneer sheets — Export quantity in France, year by year

Annual values for Veneer sheets — Export quantity in France, 1961 to 2024.
Year m3 Change
1961 35,600 m3 —
1962 29,800 m3 -16.3%
1963 31,500 m3 +5.7%
1964 29,000 m3 -7.9%
1965 31,600 m3 +9.0%
1966 28,600 m3 -9.5%
1967 26,700 m3 -6.6%
1968 26,900 m3 +0.7%
1969 27,300 m3 +1.5%
1970 32,400 m3 +18.7%
1971 29,300 m3 -9.6%
1972 31,600 m3 +7.8%
1973 40,300 m3 +27.5%
1974 34,100 m3 -15.4%
1975 28,600 m3 -16.1%
1976 35,000 m3 +22.4%
1977 31,400 m3 -10.3%
1978 34,500 m3 +9.9%
1979 35,000 m3 +1.4%
1980 38,600 m3 +10.3%
1981 36,700 m3 -4.9%
1982 34,300 m3 -6.5%
1983 34,700 m3 +1.2%
1984 35,400 m3 +2.0%
1985 35,400 m3 +0.0%
1986 35,400 m3 +0.0%
1987 29,300 m3 -17.2%
1988 29,300 m3 +0.0%
1989 47,600 m3 +62.5%
1990 60,900 m3 +27.9%
1991 51,000 m3 -16.3%
1992 50,986 m3 -0.0%
1993 49,200 m3 -3.5%
1994 58,500 m3 +18.9%
1995 54,500 m3 -6.8%
1996 68,000 m3 +24.8%
1997 62,000 m3 -8.8%
1998 69,400 m3 +11.9%
1999 62,000 m3 -10.7%
2000 77,299 m3 +24.7%
2001 72,463 m3 -6.3%
2002 71,916 m3 -0.8%
2003 56,029 m3 -22.1%
2004 38,654 m3 -31.0%
2005 36,713 m3 -5.0%
2006 36,644 m3 -0.2%
2007 33,480 m3 -8.6%
2008 28,041 m3 -16.2%
2009 17,983 m3 -35.9%
2010 22,357 m3 +24.3%
2011 20,439 m3 -8.6%
2012 41,435 m3 +102.7%
2013 47,317 m3 +14.2%
2014 69,080 m3 +46.0%
2015 74,645 m3 +8.1%
2016 91,512 m3 +22.6%
2017 91,276 m3 -0.3%
2018 103,102 m3 +13.0%
2019 97,930 m3 -5.0%
2020 68,284 m3 -30.3%
2021 71,284 m3 +4.4%
2022 63,921 m3 -10.3%
2023 55,187 m3 -13.7%
2024 58,052 m3 +5.2%

France compared with similar countries

  • France's 58,052 m3 is above the median for high income countries, which is 119 m3, 487.8× the median. (73 countries reporting)
  • France's 58,052 m3 is above the median for Europe & Central Asia, which is 3,908 m3, 14.9× the median. (51 countries reporting)

Biggest year-on-year movements

Years where Veneer sheets — Export quantity in France changed far more than this series normally does. A large move can be a real event or a change in how the figure was measured — the source note below says who published it.

YearChange FromTo
2012 +102.7% 20,439 m3 41,435 m3

Averages by decade

DecadeAverage LowestHighest Years
1960s 29,667 m3 26,700 m3 35,600 m3 9
1970s 33,220 m3 28,600 m3 40,300 m3 10
1980s 35,670 m3 29,300 m3 47,600 m3 10
1990s 58,649 m3 49,200 m3 69,400 m3 10
2000s 46,922 m3 17,983 m3 77,299 m3 10
2010s 65,909 m3 20,439 m3 103,102 m3 10
2020s 63,346 m3 55,187 m3 71,284 m3 5

Countries ranked near France

  1. 23 New Zealand 73,645 m3 compare
  2. 24 Kenya 68,178 m3 compare
  3. 25 Nepal 67,409 m3 compare
  4. 27 Malaysia 56,166 m3 compare
  5. 28 Romania 52,237 m3 compare
  6. 29 Côte d'Ivoire 51,159 m3 compare
  7. 29 Cote d'Ivoire 51,159 m3 compare

See the full ranking of 279 places →

More environment data for France

All data for France →

Frequently asked questions

What is veneer sheets — export quantity in France?
Veneer sheets — export quantity in France was 58,052 m3 in 2024, according to Food and Agriculture Organization of the United Nations.
What is the highest veneer sheets — export quantity recorded in France?
The highest recorded value was 103,102 m3 in 2018.
What is the lowest veneer sheets — export quantity recorded in France?
The lowest recorded value was 17,983 m3 in 2009.
How does France rank for veneer sheets — export quantity?
France ranks 26th out of 250 countries with data for 2024.
Is veneer sheets — export quantity rising or falling in France?
Over the last ten years it is down 16.0%. The long-run trend across the full record is rising.
Where does this France data come from?
The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Export quantity. Statizoid updates them automatically from the source API.

Download this data

CSV · JSON — 64 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).

Share, cite or embed this page

Cite this page

Veneer sheets — Export quantity in France. Statizoid, drawing on Food and Agriculture Organization of the United Nations. Retrieved 27 September 2026, from https://environment.statizoid.com/stat/veneer-sheets-export-quantity/france/

Embed or link this data

Paste this into a page to link back to these figures. The data itself is free to reuse under CC BY-NC-SA 3.0 IGO (FAO); please keep the attribution.

<a href="https://environment.statizoid.com/stat/veneer-sheets-export-quantity/france/">Veneer sheets — Export quantity in France</a> — Statizoid

About this data

Indicator
Veneer sheets — Export quantity
Unit
m3
Source
Food and Agriculture Organization of the United Nations
Licence
CC BY-NC-SA 3.0 IGO (FAO)
Coverage
279 places, 9,860 data points, 1961–2024
Last refreshed

The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en