Veneer sheets — Export quantity in Philippines
Philippines: Veneer sheets — Export quantity was 701 m3 in 2024. ◆ Volatile
Veneer sheets — Export quantity in Philippines, 1961–2024
Source: Food and Agriculture Organization of the United Nations. Measured in m3.
Analysis
In 2024, veneer sheets — export quantity in Philippines stood at 701 m3.
The figure is down 5.4% on the previous year and down 80.3% over ten years.
Over the whole period, veneer sheets — export quantity in Philippines peaked at 215,000 m3 in 1972 and was at its lowest, 334 m3, in 2020.
Philippines ranks 92nd of 250 countries on this measure, in the middle of the range.
The series is highly variable year to year, so single readings are best treated with caution.
Veneer sheets — Export quantity in Philippines, year by year
| Year | m3 | Change |
|---|---|---|
| 1961 | 36,500 m3 | — |
| 1962 | 54,800 m3 | +50.1% |
| 1963 | 70,700 m3 | +29.0% |
| 1964 | 113,200 m3 | +60.1% |
| 1965 | 99,900 m3 | -11.7% |
| 1966 | 109,000 m3 | +9.1% |
| 1967 | 109,500 m3 | +0.5% |
| 1968 | 146,000 m3 | +33.3% |
| 1969 | 124,000 m3 | -15.1% |
| 1970 | 121,900 m3 | -1.7% |
| 1971 | 136,000 m3 | +11.6% |
| 1972 | 215,000 m3 | +58.1% |
| 1973 | 169,300 m3 | -21.3% |
| 1974 | 189,000 m3 | +11.6% |
| 1975 | 99,000 m3 | -47.6% |
| 1976 | 50,000 m3 | -49.5% |
| 1977 | 36,000 m3 | -28.0% |
| 1978 | 30,600 m3 | -15.0% |
| 1979 | 49,700 m3 | +62.4% |
| 1980 | 62,800 m3 | +26.4% |
| 1981 | 39,100 m3 | -37.7% |
| 1982 | 44,600 m3 | +14.1% |
| 1983 | 122,500 m3 | +174.7% |
| 1984 | 71,400 m3 | -41.7% |
| 1985 | 68,800 m3 | -3.6% |
| 1986 | 49,800 m3 | -27.6% |
| 1987 | 64,300 m3 | +29.1% |
| 1988 | 78,500 m3 | +22.1% |
| 1989 | 64,400 m3 | -18.0% |
| 1990 | 40,100 m3 | -37.7% |
| 1991 | 29,600 m3 | -26.2% |
| 1992 | 21,600 m3 | -27.0% |
| 1993 | 7,000 m3 | -67.6% |
| 1994 | 29,800 m3 | +325.7% |
| 1995 | 32,500 m3 | +9.1% |
| 1996 | 26,300 m3 | -19.1% |
| 1997 | 31,300 m3 | +19.0% |
| 1998 | 32,000 m3 | +2.2% |
| 1999 | 4,600 m3 | -85.6% |
| 2000 | 4,600 m3 | +0.0% |
| 2001 | 2,800 m3 | -39.1% |
| 2002 | 5,982 m3 | +113.6% |
| 2003 | 4,449 m3 | -25.6% |
| 2004 | 7,493 m3 | +68.4% |
| 2005 | 6,555 m3 | -12.5% |
| 2006 | 5,857 m3 | -10.6% |
| 2007 | 6,714 m3 | +14.6% |
| 2008 | 3,764 m3 | -43.9% |
| 2009 | 3,831 m3 | +1.8% |
| 2010 | 2,609 m3 | -31.9% |
| 2011 | 6,856 m3 | +162.8% |
| 2012 | 28,313 m3 | +313.0% |
| 2013 | 7,503 m3 | -73.5% |
| 2014 | 3,557 m3 | -52.6% |
| 2015 | 951 m3 | -73.3% |
| 2016 | 669 m3 | -29.7% |
| 2017 | 573 m3 | -14.3% |
| 2018 | 4,412 m3 | +670.0% |
| 2019 | 2,346 m3 | -46.8% |
| 2020 | 334 m3 | -85.8% |
| 2021 | 1,604 m3 | +380.2% |
| 2022 | 1,175 m3 | -26.7% |
| 2023 | 741 m3 | -36.9% |
| 2024 | 701 m3 | -5.4% |
Philippines compared with similar countries
- Philippines's 701 m3 is above the median for upper middle income countries, which is 48 m3, 14.6× the median. (55 countries reporting)
- Philippines's 701 m3 is above the median for East Asia & Pacific, which is 46.5 m3, 15.1× the median. (32 countries reporting)
Biggest year-on-year movements
Years where Veneer sheets — Export quantity in Philippines changed far more than this series normally does. A large move can be a real event or a change in how the figure was measured — the source note below says who published it.
| Year | Change | From | To |
|---|---|---|---|
| 2018 | +670.0% | 573 m3 | 4,412 m3 |
| 2021 | +380.2% | 334 m3 | 1,604 m3 |
| 1994 | +325.7% | 7,000 m3 | 29,800 m3 |
| 2012 | +313.0% | 6,856 m3 | 28,313 m3 |
Averages by decade
| Decade | Average | Lowest | Highest | Years |
|---|---|---|---|---|
| 1960s | 95,956 m3 | 36,500 m3 | 146,000 m3 | 9 |
| 1970s | 109,650 m3 | 30,600 m3 | 215,000 m3 | 10 |
| 1980s | 66,620 m3 | 39,100 m3 | 122,500 m3 | 10 |
| 1990s | 25,480 m3 | 4,600 m3 | 40,100 m3 | 10 |
| 2000s | 5,204 m3 | 2,800 m3 | 7,493 m3 | 10 |
| 2010s | 5,779 m3 | 573 m3 | 28,313 m3 | 10 |
| 2020s | 911 m3 | 334 m3 | 1,604 m3 | 5 |
Countries ranked near Philippines
- 89 Madagascar 825 m3 compare
- 90 Guinea 820 m3 compare
- 91 North Macedonia 723 m3 compare
- 93 Sierra Leone 632 m3 compare
- 94 Japan 594 m3 compare
- 95 Switzerland 569 m3 compare
More environment data for Philippines
- Historical exposure to drought — Land soil moisture anomaly 6.85 Percentage change (2025)
- Historical exposure to drought — Cropland soil moisture anomaly 7.07 Percentage change (2025)
- Standard Deviation, annual growth rate 0 % change on previous year (2025)
- Standard Deviation 0.177 °C (2025)
- Temperature change 0.905 °C (2025)
- Wood-based panels — Production, annual growth rate -42.7 % change on previous year (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), annual 4.74 % change on previous year (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), per unit 0 Mt CO2e per US$ of GDP (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), per capita 0 Mt CO2e per person (2024)
- Methane (CH4) emissions from Agriculture (Mt CO2e), annual growth rate -2.01 % change on previous year (2024)
Frequently asked questions
- What is veneer sheets — export quantity in Philippines?
- Veneer sheets — export quantity in Philippines was 701 m3 in 2024, according to Food and Agriculture Organization of the United Nations.
- What is the highest veneer sheets — export quantity recorded in Philippines?
- The highest recorded value was 215,000 m3 in 1972.
- What is the lowest veneer sheets — export quantity recorded in Philippines?
- The lowest recorded value was 334 m3 in 2020.
- How does Philippines rank for veneer sheets — export quantity?
- Philippines ranks 92nd out of 250 countries with data for 2024.
- Is veneer sheets — export quantity rising or falling in Philippines?
- Over the last ten years it is down 80.3%. The long-run trend across the full record is volatile.
- Where does this Philippines data come from?
- The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Export quantity. Statizoid updates them automatically from the source API.
Download this data
CSV · JSON — 64 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).
About this data
The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en