Veneer sheets — Import quantity, per capita in Australia
Australia: Veneer sheets — Import quantity, per capita was 0.0003 m3 per person in 2024. ▼ Falling
Veneer sheets — Import quantity, per capita in Australia, 1961–2024
Source: Statizoid (derived). Measured in m3 per person.
Analysis
In 2024, veneer sheets — import quantity, per capita in Australia stood at 0.0003 m3 per person.
The figure is up 38.9% on the previous year and down 29.7% over ten years.
Over the whole period, veneer sheets — import quantity, per capita in Australia peaked at 0.0017 m3 per person in 1989 and was at its lowest, 0.0002 m3 per person, in 2023.
That places Australia 73rd out of 195 countries with data for 2024, putting it in the middle of the range.
The long-run direction has been consistently falling across the 64 years of available data.
Veneer sheets — Import quantity, per capita in Australia, year by year
| Year | m3 per person | Change |
|---|---|---|
| 1961 | 0.0003 m3 per person | — |
| 1962 | 0.0002 m3 per person | -16.4% |
| 1963 | 0.0003 m3 per person | +55.3% |
| 1964 | 0.0003 m3 per person | -7.1% |
| 1965 | 0.0005 m3 per person | +66.2% |
| 1966 | 0.0005 m3 per person | -13.5% |
| 1967 | 0.0005 m3 per person | +7.9% |
| 1968 | 0.0008 m3 per person | +63.2% |
| 1969 | 0.0013 m3 per person | +53.9% |
| 1970 | 0.0013 m3 per person | +3.8% |
| 1971 | 0.0013 m3 per person | +0.2% |
| 1972 | 0.0013 m3 per person | +2.2% |
| 1973 | 0.0012 m3 per person | -13.3% |
| 1974 | 0.0016 m3 per person | +42.2% |
| 1975 | 0.0016 m3 per person | -0.3% |
| 1976 | 0.0015 m3 per person | -7.5% |
| 1977 | 0.0016 m3 per person | +4.9% |
| 1978 | 0.001 m3 per person | -36.1% |
| 1979 | 0.0011 m3 per person | +3.7% |
| 1980 | 0.0012 m3 per person | +13.6% |
| 1981 | 0.0014 m3 per person | +17.5% |
| 1982 | 0.0014 m3 per person | +0.6% |
| 1983 | 0.0011 m3 per person | -22.0% |
| 1984 | 0.0013 m3 per person | +20.3% |
| 1985 | 0.0016 m3 per person | +18.7% |
| 1986 | 0.0014 m3 per person | -12.1% |
| 1987 | 0.0012 m3 per person | -15.7% |
| 1988 | 0.0016 m3 per person | +33.6% |
| 1989 | 0.0017 m3 per person | +9.4% |
| 1990 | 0.0013 m3 per person | -21.0% |
| 1991 | 0.0007 m3 per person | -47.2% |
| 1992 | 0.0007 m3 per person | +2.1% |
| 1993 | 0.0007 m3 per person | +3.0% |
| 1994 | 0.0013 m3 per person | +73.3% |
| 1995 | 0.0011 m3 per person | -11.4% |
| 1996 | 0.0007 m3 per person | -40.3% |
| 1997 | 0.001 m3 per person | +40.1% |
| 1998 | 0.0012 m3 per person | +23.1% |
| 1999 | 0.001 m3 per person | -19.1% |
| 2000 | 0.0008 m3 per person | -12.1% |
| 2001 | 0.0008 m3 per person | -7.4% |
| 2002 | 0.001 m3 per person | +24.0% |
| 2003 | 0.0008 m3 per person | -21.2% |
| 2004 | 0.001 m3 per person | +25.3% |
| 2005 | 0.001 m3 per person | +9.2% |
| 2006 | 0.0014 m3 per person | +34.2% |
| 2007 | 0.0017 m3 per person | +21.6% |
| 2008 | 0.0013 m3 per person | -25.2% |
| 2009 | 0.0007 m3 per person | -45.6% |
| 2010 | 0.0004 m3 per person | -40.3% |
| 2011 | 0.0008 m3 per person | +82.0% |
| 2012 | 0.0005 m3 per person | -27.8% |
| 2013 | 0.0003 m3 per person | -38.9% |
| 2014 | 0.0004 m3 per person | +12.8% |
| 2015 | 0.0006 m3 per person | +51.6% |
| 2016 | 0.0005 m3 per person | -14.5% |
| 2017 | 0.0006 m3 per person | +22.0% |
| 2018 | 0.0005 m3 per person | -17.8% |
| 2019 | 0.0005 m3 per person | +10.0% |
| 2020 | 0.0003 m3 per person | -36.1% |
| 2021 | 0.0003 m3 per person | -16.0% |
| 2022 | 0.0003 m3 per person | +10.9% |
| 2023 | 0.0002 m3 per person | -40.5% |
| 2024 | 0.0003 m3 per person | +38.9% |
Australia compared with similar countries
- Australia's 0.0003 m3 per person is below the median for high income countries, which is 0.0007 m3 per person, 40% of the median. (73 countries reporting)
- Australia's 0.0003 m3 per person is above the median for East Asia & Pacific, which is 0.0002 m3 per person, 1.2× the median. (32 countries reporting)
Averages by decade
| Decade | Average | Lowest | Highest | Years |
|---|---|---|---|---|
| 1960s | 0.0005 m3 per person | 0.0002 m3 per person | 0.0013 m3 per person | 9 |
| 1970s | 0.0014 m3 per person | 0.001 m3 per person | 0.0016 m3 per person | 10 |
| 1980s | 0.0014 m3 per person | 0.0011 m3 per person | 0.0017 m3 per person | 10 |
| 1990s | 0.001 m3 per person | 0.0007 m3 per person | 0.0013 m3 per person | 10 |
| 2000s | 0.001 m3 per person | 0.0007 m3 per person | 0.0017 m3 per person | 10 |
| 2010s | 0.0005 m3 per person | 0.0003 m3 per person | 0.0008 m3 per person | 10 |
| 2020s | 0.0003 m3 per person | 0.0002 m3 per person | 0.0003 m3 per person | 5 |
Countries ranked near Australia
More environment data for Australia
- Historical exposure to drought — Land soil moisture anomaly -4.75 Percentage change (2025)
- Historical exposure to drought — Cropland soil moisture anomaly -5.98 Percentage change (2025)
- Standard Deviation, annual growth rate 0 % change on previous year (2025)
- Standard Deviation 0.345 °C (2025)
- Temperature change 1.4 °C (2025)
- Methane (CH4) emissions (total) excluding LULUCF (Mt CO2e), annual 0.2559 % change on previous year (2024)
- Methane (CH4) emissions (total) excluding LULUCF (Mt CO2e), per unit 0 Mt CO2e per US$ of GDP (2024)
- Methane (CH4) emissions (total) excluding LULUCF (Mt CO2e), per capita 0 Mt CO2e per person (2024)
- Methane (CH4) emissions from Power Industry (Energy) (Mt CO2e) 2.87 % change on previous year (2024)
- Methane (CH4) emissions from Power Industry (Energy) (Mt CO2e), per 0 Mt CO2e per US$ of GDP (2024)
Frequently asked questions
- What is veneer sheets — import quantity, per capita in Australia?
- Veneer sheets — import quantity, per capita in Australia was 0.0003 m3 per person in 2024, according to Statizoid (derived).
- What is the highest veneer sheets — import quantity, per capita recorded in Australia?
- The highest recorded value was 0.0017 m3 per person in 1989.
- What is the lowest veneer sheets — import quantity, per capita recorded in Australia?
- The lowest recorded value was 0.0002 m3 per person in 2023.
- How does Australia rank for veneer sheets — import quantity, per capita?
- Australia ranks 73rd out of 195 countries with data for 2024.
- Is veneer sheets — import quantity, per capita rising or falling in Australia?
- Over the last ten years it is down 29.7%. The long-run trend across the full record is falling.
- Where does this Australia data come from?
- The figures come from Statizoid (derived), published as part of Veneer sheets — Import quantity, per capita. Statizoid updates them automatically from the source API.
Download this data
CSV · JSON — 64 observations, free to reuse under Derived by Statizoid from the sources named on the page.
How this figure is calculated
Veneer sheets — Import quantity divided by Population, total, matched on country and year. Neither publisher issues this ratio as a series; it is computed here from both.
Veneer sheets — Import quantity ÷ Population, total
Computed from
- Veneer sheets — Import quantity Food and Agriculture Organization of the United Nations
- Population, total World Population Prospects, United Nations (UN)
Statizoid computes this series; the underlying measurements belong to the publishers named above. The arithmetic is applied to every country and year where both inputs report, and nothing is estimated unless the page says so.
About this data
Veneer sheets — Import quantity divided by Population, total, matched on country and year. Neither publisher issues this ratio as a series; it is computed here from both.