Veneer sheets — Import quantity in Least Developed Countries (LDCs)

Least Developed Countries (LDCs): Veneer sheets — Import quantity was 199,190 m3 in 2024. ◆ Volatile

Latest (2024)
199,190 m3
Change on year
down 3.3%
Rank
15th
of 28 groups
All-time high
286,059 m3
in 2021
All-time low
300 m3
in 1966
Years of data
64
1961–2024

Veneer sheets — Import quantity in Least Developed Countries (LDCs), 1961–2024

0100.0k200.0k300.0k196119922024

Source: Food and Agriculture Organization of the United Nations. Measured in m3.

Analysis

In 2024, veneer sheets — import quantity in Least Developed Countries (LDCs) stood at 199,190 m3.

Compared with earlier readings it is down 3.3% on the previous year and up 47.6% over ten years.

Over the whole period, veneer sheets — import quantity in Least Developed Countries (LDCs) peaked at 286,059 m3 in 2021 and was at its lowest, 300 m3, in 1966.

That places Least Developed Countries (LDCs) 15th out of 28 groups with data for 2024, putting it in the middle of the range.

The series is highly variable year to year, so single readings are best treated with caution.

Veneer sheets — Import quantity in Least Developed Countries (LDCs), year by year

Annual values for Veneer sheets — Import quantity in Least Developed Countries (LDCs), 1961 to 2024.
Year m3 Change
1961 1,200 m3
1962 800 m3 -33.3%
1963 2,000 m3 +150.0%
1964 2,200 m3 +10.0%
1965 2,100 m3 -4.5%
1966 300 m3 -85.7%
1967 300 m3 +0.0%
1968 1,200 m3 +300.0%
1969 1,100 m3 -8.3%
1970 1,400 m3 +27.3%
1971 1,100 m3 -21.4%
1972 2,000 m3 +81.8%
1973 1,900 m3 -5.0%
1974 2,200 m3 +15.8%
1975 5,200 m3 +136.4%
1976 7,500 m3 +44.2%
1977 4,700 m3 -37.3%
1978 8,500 m3 +80.9%
1979 4,200 m3 -50.6%
1980 3,900 m3 -7.1%
1981 3,200 m3 -17.9%
1982 3,900 m3 +21.9%
1983 3,900 m3 +0.0%
1984 3,900 m3 +0.0%
1985 3,900 m3 +0.0%
1986 2,636 m3 -32.4%
1987 2,501 m3 -5.1%
1988 2,530 m3 +1.2%
1989 2,509 m3 -0.8%
1990 2,550 m3 +1.6%
1991 2,550 m3 +0.0%
1992 3,227 m3 +26.5%
1993 1,156 m3 -64.2%
1994 1,077 m3 -6.8%
1995 1,274 m3 +18.3%
1996 2,689 m3 +111.1%
1997 4,292 m3 +59.6%
1998 4,348 m3 +1.3%
1999 5,508 m3 +26.7%
2000 3,928 m3 -28.7%
2001 5,037 m3 +28.2%
2002 4,228 m3 -16.1%
2003 5,940 m3 +40.5%
2004 23,314 m3 +292.5%
2005 22,241 m3 -4.6%
2006 21,861 m3 -1.7%
2007 44,019 m3 +101.4%
2008 11,688 m3 -73.4%
2009 9,415 m3 -19.4%
2010 11,250 m3 +19.5%
2011 36,132 m3 +221.2%
2012 23,086 m3 -36.1%
2013 127,974 m3 +454.3%
2014 134,973 m3 +5.5%
2015 66,741 m3 -50.6%
2016 86,758 m3 +30.0%
2017 54,732 m3 -36.9%
2018 77,875 m3 +42.3%
2019 149,662 m3 +92.2%
2020 200,584 m3 +34.0%
2021 286,059 m3 +42.6%
2022 182,093 m3 -36.3%
2023 206,077 m3 +13.2%
2024 199,190 m3 -3.3%

Biggest year-on-year movements

Years where Veneer sheets — Import quantity in Least Developed Countries (LDCs) changed far more than this series normally does. A large move can be a real event or a change in how the figure was measured — the source note below says who published it.

YearChange FromTo
2013 +454.3% 23,086 m3 127,974 m3
1968 +300.0% 300 m3 1,200 m3
2004 +292.5% 5,940 m3 23,314 m3

Averages by decade

DecadeAverage LowestHighest Years
1960s 1,244 m3 300 m3 2,200 m3 9
1970s 3,870 m3 1,100 m3 8,500 m3 10
1980s 3,288 m3 2,501 m3 3,900 m3 10
1990s 2,867 m3 1,077 m3 5,508 m3 10
2000s 15,167 m3 3,928 m3 44,019 m3 10
2010s 76,918 m3 11,250 m3 149,662 m3 10
2020s 214,801 m3 182,093 m3 286,059 m3 5

Countries ranked near Least Developed Countries (LDCs)

  1. 12 Spain 148,784 m3 compare
  2. 13 Cambodia 144,490 m3 compare
  3. 14 Malaysia 132,244 m3 compare
  4. 15 Republic of Korea 120,209 m3 compare
  5. 16 USSR 119,000 m3 compare
  6. 17 Philippines 100,361 m3 compare
  7. 18 Poland 100,075 m3 compare

See the full ranking of 267 places →

More environment data for Least Developed Countries (LDCs)

All data for Least Developed Countries (LDCs) →

Frequently asked questions

What is veneer sheets — import quantity in Least Developed Countries (LDCs)?
Veneer sheets — import quantity in Least Developed Countries (LDCs) was 199,190 m3 in 2024, according to Food and Agriculture Organization of the United Nations.
What is the highest veneer sheets — import quantity recorded in Least Developed Countries (LDCs)?
The highest recorded value was 286,059 m3 in 2021.
What is the lowest veneer sheets — import quantity recorded in Least Developed Countries (LDCs)?
The lowest recorded value was 300 m3 in 1966.
How does Least Developed Countries (LDCs) rank for veneer sheets — import quantity?
Least Developed Countries (LDCs) ranks 15th out of 28 groups with data for 2024.
Is veneer sheets — import quantity rising or falling in Least Developed Countries (LDCs)?
Over the last ten years it is up 47.6%. The long-run trend across the full record is volatile.
Where does this Least Developed Countries (LDCs) data come from?
The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Import quantity. Statizoid updates them automatically from the source API.

Download this data

CSV · JSON — 64 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).

Share, cite or embed this page

Cite this page

Veneer sheets — Import quantity in Least Developed Countries (LDCs). Statizoid, drawing on Food and Agriculture Organization of the United Nations. Retrieved 17 September 2026, from https://environment.statizoid.com/stat/veneer-sheets-import-quantity/least-developed-countries-ldcs/

Embed or link this data

Paste this into a page to link back to these figures. The data itself is free to reuse under CC BY-NC-SA 3.0 IGO (FAO); please keep the attribution.

<a href="https://environment.statizoid.com/stat/veneer-sheets-import-quantity/least-developed-countries-ldcs/">Veneer sheets — Import quantity in Least Developed Countries (LDCs)</a> — Statizoid

About this data

Indicator
Veneer sheets — Import quantity
Unit
m3
Source
Food and Agriculture Organization of the United Nations
Licence
CC BY-NC-SA 3.0 IGO (FAO)
Coverage
267 places, 10,713 data points, 1961–2024
Last refreshed

The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en