Veneer sheets — Import quantity in Low Income Food Deficit Countries (LIFDCs)
Low Income Food Deficit Countries (LIFDCs): Veneer sheets — Import quantity was 42,191 m3 in 2024. ◆ Volatile
Veneer sheets — Import quantity in Low Income Food Deficit Countries (LIFDCs), 1961–2024
Source: Food and Agriculture Organization of the United Nations. Measured in m3.
Analysis
The most recent figure for veneer sheets — import quantity in Low Income Food Deficit Countries (LIFDCs) is 42,191 m3, measured in 2024.
Compared with earlier readings it is down 39.0% on the previous year and down 60.6% over ten years.
Over the whole period, veneer sheets — import quantity in Low Income Food Deficit Countries (LIFDCs) peaked at 119,643 m3 in 2013 and was at its lowest, 1,300 m3, in 1962.
That places Low Income Food Deficit Countries (LIFDCs) 19th out of 28 groups with data for 2024, putting it in the middle of the range.
The series is highly variable year to year, so single readings are best treated with caution.
Veneer sheets — Import quantity in Low Income Food Deficit Countries (LIFDCs), year by year
| Year | m3 | Change |
|---|---|---|
| 1961 | 1,700 m3 | — |
| 1962 | 1,300 m3 | -23.5% |
| 1963 | 2,600 m3 | +100.0% |
| 1964 | 2,841 m3 | +9.3% |
| 1965 | 3,420 m3 | +20.4% |
| 1966 | 1,700 m3 | -50.3% |
| 1967 | 1,600 m3 | -5.9% |
| 1968 | 2,500 m3 | +56.2% |
| 1969 | 2,400 m3 | -4.0% |
| 1970 | 2,700 m3 | +12.5% |
| 1971 | 2,300 m3 | -14.8% |
| 1972 | 2,300 m3 | +0.0% |
| 1973 | 3,500 m3 | +52.2% |
| 1974 | 3,300 m3 | -5.7% |
| 1975 | 5,000 m3 | +51.5% |
| 1976 | 5,900 m3 | +18.0% |
| 1977 | 7,600 m3 | +28.8% |
| 1978 | 15,300 m3 | +101.3% |
| 1979 | 13,600 m3 | -11.1% |
| 1980 | 12,300 m3 | -9.6% |
| 1981 | 28,000 m3 | +127.6% |
| 1982 | 4,000 m3 | -85.7% |
| 1983 | 3,800 m3 | -5.0% |
| 1984 | 3,700 m3 | -2.6% |
| 1985 | 3,700 m3 | +0.0% |
| 1986 | 1,436 m3 | -61.2% |
| 1987 | 1,301 m3 | -9.4% |
| 1988 | 1,330 m3 | +2.2% |
| 1989 | 1,309 m3 | -1.6% |
| 1990 | 1,749 m3 | +33.6% |
| 1991 | 1,749 m3 | +0.0% |
| 1992 | 16,202 m3 | +826.4% |
| 1993 | 2,416 m3 | -85.1% |
| 1994 | 4,468 m3 | +84.9% |
| 1995 | 4,383 m3 | -1.9% |
| 1996 | 6,280 m3 | +43.3% |
| 1997 | 8,934 m3 | +42.3% |
| 1998 | 8,036 m3 | -10.1% |
| 1999 | 10,102 m3 | +25.7% |
| 2000 | 7,489 m3 | -25.9% |
| 2001 | 8,193 m3 | +9.4% |
| 2002 | 6,121 m3 | -25.3% |
| 2003 | 13,832 m3 | +126.0% |
| 2004 | 28,447 m3 | +105.7% |
| 2005 | 28,952 m3 | +1.8% |
| 2006 | 26,487 m3 | -8.5% |
| 2007 | 48,039 m3 | +81.4% |
| 2008 | 22,281 m3 | -53.6% |
| 2009 | 11,895 m3 | -46.6% |
| 2010 | 11,879 m3 | -0.1% |
| 2011 | 31,557 m3 | +165.7% |
| 2012 | 24,181 m3 | -23.4% |
| 2013 | 119,643 m3 | +394.8% |
| 2014 | 107,090 m3 | -10.5% |
| 2015 | 35,148 m3 | -67.2% |
| 2016 | 43,362 m3 | +23.4% |
| 2017 | 28,707 m3 | -33.8% |
| 2018 | 31,565 m3 | +10.0% |
| 2019 | 27,120 m3 | -14.1% |
| 2020 | 46,621 m3 | +71.9% |
| 2021 | 79,556 m3 | +70.6% |
| 2022 | 59,530 m3 | -25.2% |
| 2023 | 69,207 m3 | +16.3% |
| 2024 | 42,191 m3 | -39.0% |
Biggest year-on-year movements
Years where Veneer sheets — Import quantity in Low Income Food Deficit Countries (LIFDCs) changed far more than this series normally does. A large move can be a real event or a change in how the figure was measured — the source note below says who published it.
| Year | Change | From | To |
|---|---|---|---|
| 1992 | +826.4% | 1,749 m3 | 16,202 m3 |
| 2013 | +394.8% | 24,181 m3 | 119,643 m3 |
Averages by decade
| Decade | Average | Lowest | Highest | Years |
|---|---|---|---|---|
| 1960s | 2,229 m3 | 1,300 m3 | 3,420 m3 | 9 |
| 1970s | 6,150 m3 | 2,300 m3 | 15,300 m3 | 10 |
| 1980s | 6,088 m3 | 1,301 m3 | 28,000 m3 | 10 |
| 1990s | 6,432 m3 | 1,749 m3 | 16,202 m3 | 10 |
| 2000s | 20,174 m3 | 6,121 m3 | 48,039 m3 | 10 |
| 2010s | 46,025 m3 | 11,879 m3 | 119,643 m3 | 10 |
| 2020s | 59,421 m3 | 42,191 m3 | 79,556 m3 | 5 |
Countries ranked near Low Income Food Deficit Countries (LIFDCs)
More environment data for Low Income Food Deficit Countries (LIFDCs)
- Standard Deviation, annual growth rate 0 % change on previous year (2025)
- Standard Deviation 0.238 °C (2025)
- Temperature change 1.36 °C (2025)
- Cropland — Share in Agricultural land 25.98 % (2024)
- Cropland — Area per capita 0.21 ha/cap (2024)
- Cropland — Area 224,322 1000 ha (2024)
- Nutrient nitrogen N (total) — Import quantity 1.96 million t (2024)
- Nutrient nitrogen N (total) — Use per area of cropland 12.73 kg/ha (2024)
- Nutrient nitrogen N (total) — Use per capita 2.65 kg/cap (2024)
- Nutrient nitrogen N (total) — Export quantity 316,092 t (2024)
Frequently asked questions
- What is veneer sheets — import quantity in Low Income Food Deficit Countries (LIFDCs)?
- Veneer sheets — import quantity in Low Income Food Deficit Countries (LIFDCs) was 42,191 m3 in 2024, according to Food and Agriculture Organization of the United Nations.
- What is the highest veneer sheets — import quantity recorded in Low Income Food Deficit Countries (LIFDCs)?
- The highest recorded value was 119,643 m3 in 2013.
- What is the lowest veneer sheets — import quantity recorded in Low Income Food Deficit Countries (LIFDCs)?
- The lowest recorded value was 1,300 m3 in 1962.
- How does Low Income Food Deficit Countries (LIFDCs) rank for veneer sheets — import quantity?
- Low Income Food Deficit Countries (LIFDCs) ranks 19th out of 28 groups with data for 2024.
- Is veneer sheets — import quantity rising or falling in Low Income Food Deficit Countries (LIFDCs)?
- Over the last ten years it is down 60.6%. The long-run trend across the full record is volatile.
- Where does this Low Income Food Deficit Countries (LIFDCs) data come from?
- The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Import quantity. Statizoid updates them automatically from the source API.
Download this data
CSV · JSON — 64 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).
About this data
The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en