Veneer sheets — Production in Asia
Asia: Veneer sheets — Production was 8.14 million m3 in 2024. ◆ Volatile
Veneer sheets — Production in Asia, 1961–2024
Source: Food and Agriculture Organization of the United Nations. Measured in m3.
Analysis
Asia recorded 8.14 million m3 for veneer sheets — production in 2024.
The figure is down 1.0% on the previous year and up 17.8% over ten years.
Over the whole period, veneer sheets — production in Asia peaked at 8.57 million m3 in 2022 and was at its lowest, 70,600 m3, in 1961.
Asia ranks 2nd of 30 groups on this measure, in the top 10%.
The series is highly variable year to year, so single readings are best treated with caution.
Veneer sheets — Production in Asia, year by year
| Year | m3 | Change |
|---|---|---|
| 1961 | 70,600 m3 | — |
| 1962 | 116,700 m3 | +65.3% |
| 1963 | 115,200 m3 | -1.3% |
| 1964 | 241,600 m3 | +109.7% |
| 1965 | 302,100 m3 | +25.0% |
| 1966 | 430,500 m3 | +42.5% |
| 1967 | 611,400 m3 | +42.0% |
| 1968 | 540,600 m3 | -11.6% |
| 1969 | 503,600 m3 | -6.8% |
| 1970 | 825,400 m3 | +63.9% |
| 1971 | 892,600 m3 | +8.1% |
| 1972 | 919,600 m3 | +3.0% |
| 1973 | 887,000 m3 | -3.5% |
| 1974 | 932,300 m3 | +5.1% |
| 1975 | 871,600 m3 | -6.5% |
| 1976 | 897,806 m3 | +3.0% |
| 1977 | 953,704 m3 | +6.2% |
| 1978 | 981,004 m3 | +2.9% |
| 1979 | 1.02 million m3 | +4.3% |
| 1980 | 1.05 million m3 | +3.1% |
| 1981 | 1.10 million m3 | +4.0% |
| 1982 | 1.15 million m3 | +4.6% |
| 1983 | 1.26 million m3 | +9.6% |
| 1984 | 1.30 million m3 | +3.7% |
| 1985 | 1.25 million m3 | -3.8% |
| 1986 | 1.13 million m3 | -10.1% |
| 1987 | 1.17 million m3 | +3.9% |
| 1988 | 1.00 million m3 | -14.3% |
| 1989 | 1.01 million m3 | +0.1% |
| 1990 | 1.17 million m3 | +16.4% |
| 1991 | 1.44 million m3 | +23.3% |
| 1992 | 1.87 million m3 | +29.8% |
| 1993 | 2.74 million m3 | +46.3% |
| 1994 | 2.61 million m3 | -4.8% |
| 1995 | 2.35 million m3 | -10.0% |
| 1996 | 2.42 million m3 | +3.0% |
| 1997 | 1.90 million m3 | -21.4% |
| 1998 | 2.16 million m3 | +13.5% |
| 1999 | 2.38 million m3 | +10.4% |
| 2000 | 2.91 million m3 | +22.2% |
| 2001 | 2.71 million m3 | -6.8% |
| 2002 | 3.17 million m3 | +17.2% |
| 2003 | 5.64 million m3 | +77.9% |
| 2004 | 5.53 million m3 | -2.0% |
| 2005 | 5.66 million m3 | +2.4% |
| 2006 | 5.68 million m3 | +0.3% |
| 2007 | 5.85 million m3 | +3.1% |
| 2008 | 6.14 million m3 | +5.0% |
| 2009 | 6.07 million m3 | -1.2% |
| 2010 | 6.08 million m3 | +0.2% |
| 2011 | 6.27 million m3 | +3.0% |
| 2012 | 6.34 million m3 | +1.2% |
| 2013 | 6.59 million m3 | +3.9% |
| 2014 | 6.91 million m3 | +4.9% |
| 2015 | 6.91 million m3 | +0.0% |
| 2016 | 7.17 million m3 | +3.7% |
| 2017 | 6.92 million m3 | -3.5% |
| 2018 | 7.49 million m3 | +8.3% |
| 2019 | 7.72 million m3 | +3.1% |
| 2020 | 7.32 million m3 | -5.3% |
| 2021 | 8.55 million m3 | +16.9% |
| 2022 | 8.57 million m3 | +0.2% |
| 2023 | 8.22 million m3 | -4.0% |
| 2024 | 8.14 million m3 | -1.0% |
Biggest year-on-year movements
Years where Veneer sheets — Production in Asia changed far more than this series normally does. A large move can be a real event or a change in how the figure was measured — the source note below says who published it.
| Year | Change | From | To |
|---|---|---|---|
| 1964 | +109.7% | 115,200 m3 | 241,600 m3 |
| 2003 | +77.9% | 3.17 million m3 | 5.64 million m3 |
| 1962 | +65.3% | 70,600 m3 | 116,700 m3 |
| 1970 | +63.9% | 503,600 m3 | 825,400 m3 |
Averages by decade
| Decade | Average | Lowest | Highest | Years |
|---|---|---|---|---|
| 1960s | 325,811 m3 | 70,600 m3 | 611,400 m3 | 9 |
| 1970s | 918,411 m3 | 825,400 m3 | 1.02 million m3 | 10 |
| 1980s | 1.14 million m3 | 1.00 million m3 | 1.30 million m3 | 10 |
| 1990s | 2.10 million m3 | 1.17 million m3 | 2.74 million m3 | 10 |
| 2000s | 4.94 million m3 | 2.71 million m3 | 6.14 million m3 | 10 |
| 2010s | 6.84 million m3 | 6.08 million m3 | 7.72 million m3 | 10 |
| 2020s | 8.16 million m3 | 7.32 million m3 | 8.57 million m3 | 5 |
Countries ranked near Asia
- 1 China 2.73 million m3 compare
- 2 China, mainland 2.70 million m3 compare
- 3 United States 2.20 million m3 compare
- 4 Viet Nam 2.05 million m3 compare
- 4 Vietnam 2.05 million m3 compare
More environment data for Asia
- Historical exposure to drought — Land soil moisture anomaly -2.4 Percentage change (2025)
- Historical exposure to drought — Cropland soil moisture anomaly 0.4646 Percentage change (2025)
- Standard Deviation, annual growth rate 0 % change on previous year (2025)
- Temperature change 1.83 °C (2025)
- Standard Deviation 0.229 °C (2025)
- Sawlogs and veneer logs, non-coniferous — Production 213.39 million m3 (2024)
- Industrial roundwood, coniferous — Production 80.29 million m3 (2024)
- Industrial roundwood, non-coniferous — Production 400.22 million m3 (2024)
- Sawlogs and veneer logs — Production 257.46 million m3 (2024)
- Wood charcoal — Production 10.14 million t (2024)
Frequently asked questions
- What is veneer sheets — production in Asia?
- Veneer sheets — production in Asia was 8.14 million m3 in 2024, according to Food and Agriculture Organization of the United Nations.
- What is the highest veneer sheets — production recorded in Asia?
- The highest recorded value was 8.57 million m3 in 2022.
- What is the lowest veneer sheets — production recorded in Asia?
- The lowest recorded value was 70,600 m3 in 1961.
- How does Asia rank for veneer sheets — production?
- Asia ranks 2nd out of 30 groups with data for 2024.
- Is veneer sheets — production rising or falling in Asia?
- Over the last ten years it is up 17.8%. The long-run trend across the full record is volatile.
- Where does this Asia data come from?
- The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Production. Statizoid updates them automatically from the source API.
Download this data
CSV · JSON — 64 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).
About this data
The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en