Veneer sheets — Production in Brazil

Brazil: Veneer sheets — Production was 550,000 m3 in 2024. ◆ Volatile

Latest (2024)
550,000 m3
Change on year
unchanged
World rank
12th
of 248 countries
All-time high
1.54 million m3
in 2006
All-time low
28,000 m3
in 1961
Years of data
64
1961–2024

Veneer sheets — Production in Brazil, 1961–2024

0500.0k1.0M1.5M196119922024

Source: Food and Agriculture Organization of the United Nations. Measured in m3.

Analysis

Brazil recorded 550,000 m3 for veneer sheets — production in 2024.

The figure is unchanged over ten years.

Over the whole period, veneer sheets — production in Brazil peaked at 1.54 million m3 in 2006 and was at its lowest, 28,000 m3, in 1961.

That places Brazil 12th out of 248 countries with data for 2024, putting it in the top 10%.

The series is highly variable year to year, so single readings are best treated with caution.

Veneer sheets — Production in Brazil, year by year

Annual values for Veneer sheets — Production in Brazil, 1961 to 2024.
Year m3 Change
1961 28,000 m3 —
1962 35,000 m3 +25.0%
1963 40,000 m3 +14.3%
1964 40,000 m3 +0.0%
1965 50,000 m3 +25.0%
1966 65,000 m3 +30.0%
1967 77,000 m3 +18.5%
1968 80,000 m3 +3.9%
1969 90,000 m3 +12.5%
1970 96,000 m3 +6.7%
1971 116,000 m3 +20.8%
1972 152,000 m3 +31.0%
1973 188,000 m3 +23.7%
1974 175,000 m3 -6.9%
1975 154,000 m3 -12.0%
1976 169,000 m3 +9.7%
1977 190,000 m3 +12.4%
1978 190,000 m3 +0.0%
1979 200,000 m3 +5.3%
1980 216,000 m3 +8.0%
1981 234,000 m3 +8.3%
1982 234,000 m3 +0.0%
1983 234,000 m3 +0.0%
1984 234,000 m3 +0.0%
1985 234,000 m3 +0.0%
1986 234,000 m3 +0.0%
1987 234,000 m3 +0.0%
1988 234,000 m3 +0.0%
1989 234,000 m3 +0.0%
1990 234,000 m3 +0.0%
1991 234,000 m3 +0.0%
1992 234,000 m3 +0.0%
1993 300,000 m3 +28.2%
1994 310,000 m3 +3.3%
1995 300,000 m3 -3.2%
1996 304,000 m3 +1.3%
1997 468,000 m3 +53.9%
1998 440,000 m3 -6.0%
1999 560,000 m3 +27.3%
2000 620,000 m3 +10.7%
2001 620,000 m3 +0.0%
2002 550,000 m3 -11.3%
2003 550,000 m3 +0.0%
2004 550,000 m3 +0.0%
2005 1.46 million m3 +166.2%
2006 1.54 million m3 +5.2%
2007 1.21 million m3 -21.7%
2008 1.35 million m3 +11.8%
2009 1.13 million m3 -16.4%
2010 550,000 m3 -51.2%
2011 550,000 m3 +0.0%
2012 550,000 m3 +0.0%
2013 550,000 m3 +0.0%
2014 550,000 m3 +0.0%
2015 550,000 m3 +0.0%
2016 550,000 m3 +0.0%
2017 550,000 m3 +0.0%
2018 550,000 m3 +0.0%
2019 550,000 m3 +0.0%
2020 550,000 m3 +0.0%
2021 550,000 m3 +0.0%
2022 550,000 m3 +0.0%
2023 550,000 m3 +0.0%
2024 550,000 m3 +0.0%

Brazil compared with similar countries

  • Brazil's 550,000 m3 is above the median for upper middle income countries, which is 568 m3, 968.3× the median. (55 countries reporting)

Biggest year-on-year movements

Years where Veneer sheets — Production in Brazil changed far more than this series normally does. A large move can be a real event or a change in how the figure was measured — the source note below says who published it.

YearChange FromTo
2005 +166.2% 550,000 m3 1.46 million m3
1997 +53.9% 304,000 m3 468,000 m3
2010 -51.2% 1.13 million m3 550,000 m3
1972 +31.0% 116,000 m3 152,000 m3
1966 +30.0% 50,000 m3 65,000 m3

Averages by decade

DecadeAverage LowestHighest Years
1960s 56,111 m3 28,000 m3 90,000 m3 9
1970s 163,000 m3 96,000 m3 200,000 m3 10
1980s 232,200 m3 216,000 m3 234,000 m3 10
1990s 338,400 m3 234,000 m3 560,000 m3 10
2000s 957,500 m3 550,000 m3 1.54 million m3 10
2010s 550,000 m3 550,000 m3 550,000 m3 10
2020s 550,000 m3 550,000 m3 550,000 m3 5

Countries ranked near Brazil

  1. 9 Gabon 610,000 m3 compare
  2. 10 Mexico 606,000 m3 compare
  3. 11 Canada 581,480 m3 compare
  4. 13 Uganda 501,000 m3 compare
  5. 14 Côte d'Ivoire 405,908 m3 compare
  6. 14 Cote d'Ivoire 405,908 m3 compare

See the full ranking of 278 places →

More environment data for Brazil

All data for Brazil →

Frequently asked questions

What is veneer sheets — production in Brazil?
Veneer sheets — production in Brazil was 550,000 m3 in 2024, according to Food and Agriculture Organization of the United Nations.
What is the highest veneer sheets — production recorded in Brazil?
The highest recorded value was 1.54 million m3 in 2006.
What is the lowest veneer sheets — production recorded in Brazil?
The lowest recorded value was 28,000 m3 in 1961.
How does Brazil rank for veneer sheets — production?
Brazil ranks 12th out of 248 countries with data for 2024.
Is veneer sheets — production rising or falling in Brazil?
Over the last ten years it is unchanged. The long-run trend across the full record is volatile.
Where does this Brazil data come from?
The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Production. Statizoid updates them automatically from the source API.

Download this data

CSV · JSON — 64 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).

Share, cite or embed this page

Cite this page

Veneer sheets — Production in Brazil. Statizoid, drawing on Food and Agriculture Organization of the United Nations. Retrieved 27 September 2026, from https://environment.statizoid.com/stat/veneer-sheets-production/brazil/

Embed or link this data

Paste this into a page to link back to these figures. The data itself is free to reuse under CC BY-NC-SA 3.0 IGO (FAO); please keep the attribution.

<a href="https://environment.statizoid.com/stat/veneer-sheets-production/brazil/">Veneer sheets — Production in Brazil</a> — Statizoid

About this data

Indicator
Veneer sheets — Production
Unit
m3
Source
Food and Agriculture Organization of the United Nations
Licence
CC BY-NC-SA 3.0 IGO (FAO)
Coverage
278 places, 9,227 data points, 1961–2024
Last refreshed

The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en