Veneer sheets — Production in Czechoslovakia

Czechoslovakia: Veneer sheets — Production was 19,000 m3 in 1992. ▲ Rising

Latest (1992)
19,000 m3
Change on year
down 29.6%
World rank
71st
of 248 countries
All-time high
75,000 m3
in 1977
All-time low
19,000 m3
in 1992
Years of data
32
1961–1992

Veneer sheets — Production in Czechoslovakia, 1961–1992

20.0k40.0k60.0k80.0k1961197619921961: 35.8k m31962: 41.0k m31963: 45.6k m31964: 45.0k m31965: 45.0k m31966: 45.0k m31967: 44.4k m31968: 48.7k m31969: 50.3k m31970: 52.6k m31971: 58.8k m31972: 61.1k m31973: 62.5k m31974: 65.5k m31975: 67.1k m31976: 66.0k m31977: 75.0k m31978: 52.0k m31979: 57.0k m31980: 58.0k m31981: 59.0k m31982: 57.0k m31983: 59.0k m31984: 60.0k m31985: 56.0k m31986: 59.0k m31987: 63.0k m31988: 56.0k m31989: 55.0k m31990: 47.0k m31991: 27.0k m31992: 19.0k m3

Source: Food and Agriculture Organization of the United Nations. Measured in m3.

Analysis

Czechoslovakia recorded 19,000 m3 for veneer sheets — production in 1992. That is the lowest value across all 32 years on record.

Compared with earlier readings it is down 29.6% on the previous year and down 66.7% over ten years.

Over the whole period, veneer sheets — production in Czechoslovakia peaked at 75,000 m3 in 1977 and was at its lowest, 19,000 m3, in 1992.

Czechoslovakia ranks 71st of 248 countries on this measure, in the middle of the range.

The long-run direction has been consistently rising across the 32 years of available data.

Veneer sheets — Production in Czechoslovakia, year by year

Annual values for Veneer sheets — Production in Czechoslovakia, 1961 to 1992.
Year m3 Change
1961 35,800 m3 —
1962 41,000 m3 +14.5%
1963 45,600 m3 +11.2%
1964 45,000 m3 -1.3%
1965 45,000 m3 +0.0%
1966 45,000 m3 +0.0%
1967 44,400 m3 -1.3%
1968 48,700 m3 +9.7%
1969 50,300 m3 +3.3%
1970 52,600 m3 +4.6%
1971 58,800 m3 +11.8%
1972 61,100 m3 +3.9%
1973 62,500 m3 +2.3%
1974 65,500 m3 +4.8%
1975 67,100 m3 +2.4%
1976 66,000 m3 -1.6%
1977 75,000 m3 +13.6%
1978 52,000 m3 -30.7%
1979 57,000 m3 +9.6%
1980 58,000 m3 +1.8%
1981 59,000 m3 +1.7%
1982 57,000 m3 -3.4%
1983 59,000 m3 +3.5%
1984 60,000 m3 +1.7%
1985 56,000 m3 -6.7%
1986 59,000 m3 +5.4%
1987 63,000 m3 +6.8%
1988 56,000 m3 -11.1%
1989 55,000 m3 -1.8%
1990 47,000 m3 -14.5%
1991 27,000 m3 -42.6%
1992 19,000 m3 -29.6%

Biggest year-on-year movements

Years where Veneer sheets — Production in Czechoslovakia changed far more than this series normally does. A large move can be a real event or a change in how the figure was measured — the source note below says who published it.

YearChange FromTo
1991 -42.6% 47,000 m3 27,000 m3
1978 -30.7% 75,000 m3 52,000 m3

Averages by decade

DecadeAverage LowestHighest Years
1960s 44,533 m3 35,800 m3 50,300 m3 9
1970s 61,760 m3 52,000 m3 75,000 m3 10
1980s 58,200 m3 55,000 m3 63,000 m3 10
1990s 31,000 m3 19,000 m3 47,000 m3 3

Countries ranked near Czechoslovakia

  1. 68 Slovakia 21,500 m3
  2. 69 Cambodia 21,000 m3
  3. 70 Portugal 20,000 m3 compare
  4. 71 Serbia and Montenegro 19,000 m3
  5. 73 Argentina 17,435 m3 compare
  6. 74 Zimbabwe 17,000 m3 compare

See the full ranking of 278 places →

More environment data for Czechoslovakia

All data for Czechoslovakia →

Frequently asked questions

What is veneer sheets — production in Czechoslovakia?
Veneer sheets — production in Czechoslovakia was 19,000 m3 in 1992, according to Food and Agriculture Organization of the United Nations.
What is the highest veneer sheets — production recorded in Czechoslovakia?
The highest recorded value was 75,000 m3 in 1977.
What is the lowest veneer sheets — production recorded in Czechoslovakia?
The lowest recorded value was 19,000 m3 in 1992.
How does Czechoslovakia rank for veneer sheets — production?
Czechoslovakia ranks 71st out of 248 countries with data for 1992.
Is veneer sheets — production rising or falling in Czechoslovakia?
Over the last ten years it is down 66.7%. The long-run trend across the full record is rising.
Where does this Czechoslovakia data come from?
The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Production. Statizoid updates them automatically from the source API.

Download this data

CSV · JSON — 32 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).

Share, cite or embed this page

Cite this page

Veneer sheets — Production in Czechoslovakia. Statizoid, drawing on Food and Agriculture Organization of the United Nations. Retrieved 27 September 2026, from https://environment.statizoid.com/stat/veneer-sheets-production/czechoslovakia/

Embed or link this data

Paste this into a page to link back to these figures. The data itself is free to reuse under CC BY-NC-SA 3.0 IGO (FAO); please keep the attribution.

<a href="https://environment.statizoid.com/stat/veneer-sheets-production/czechoslovakia/">Veneer sheets — Production in Czechoslovakia</a> — Statizoid

About this data

Indicator
Veneer sheets — Production
Unit
m3
Source
Food and Agriculture Organization of the United Nations
Licence
CC BY-NC-SA 3.0 IGO (FAO)
Coverage
278 places, 9,227 data points, 1961–2024
Last refreshed

The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en