Veneer sheets — Production in Fiji
Fiji: Veneer sheets — Production was 9,000 m3 in 2024. ▲ Rising
Veneer sheets — Production in Fiji, 1970–2024
Source: Food and Agriculture Organization of the United Nations. Measured in m3.
Analysis
Fiji recorded 9,000 m3 for veneer sheets — production in 2024.
Compared with earlier readings it is unchanged over ten years.
Over the whole period, veneer sheets — production in Fiji peaked at 17,849 m3 in 2005 and was at its lowest, 400 m3, in 1970.
That places Fiji 86th out of 248 countries with data for 2024, putting it in the middle of the range.
The long-run direction has been consistently rising across the 55 years of available data.
Veneer sheets — Production in Fiji, year by year
| Year | m3 | Change |
|---|---|---|
| 1970 | 400 m3 | — |
| 1971 | 1,300 m3 | +225.0% |
| 1972 | 1,000 m3 | -23.1% |
| 1973 | 2,700 m3 | +170.0% |
| 1974 | 2,600 m3 | -3.7% |
| 1975 | 8,000 m3 | +207.7% |
| 1976 | 7,000 m3 | -12.5% |
| 1977 | 7,000 m3 | +0.0% |
| 1978 | 7,000 m3 | +0.0% |
| 1979 | 8,000 m3 | +14.3% |
| 1980 | 7,000 m3 | -12.5% |
| 1981 | 11,000 m3 | +57.1% |
| 1982 | 10,000 m3 | -9.1% |
| 1983 | 13,000 m3 | +30.0% |
| 1984 | 14,000 m3 | +7.7% |
| 1985 | 15,000 m3 | +7.1% |
| 1986 | 10,400 m3 | -30.7% |
| 1987 | 10,300 m3 | -1.0% |
| 1988 | 10,600 m3 | +2.9% |
| 1989 | 10,600 m3 | +0.0% |
| 1990 | 10,600 m3 | +0.0% |
| 1991 | 10,100 m3 | -4.7% |
| 1992 | 10,100 m3 | +0.0% |
| 1993 | 9,935 m3 | -1.6% |
| 1994 | 11,004 m3 | +10.8% |
| 1995 | 6,090 m3 | -44.7% |
| 1996 | 2,183 m3 | -64.2% |
| 1997 | 6,375 m3 | +192.0% |
| 1998 | 6,000 m3 | -5.9% |
| 1999 | 4,000 m3 | -33.3% |
| 2000 | 3,000 m3 | -25.0% |
| 2001 | 3,000 m3 | +0.0% |
| 2002 | 5,000 m3 | +66.7% |
| 2003 | 8,000 m3 | +60.0% |
| 2004 | 8,000 m3 | +0.0% |
| 2005 | 17,849 m3 | +123.1% |
| 2006 | 17,000 m3 | -4.8% |
| 2007 | 17,000 m3 | +0.0% |
| 2008 | 9,000 m3 | -47.1% |
| 2009 | 9,000 m3 | +0.0% |
| 2010 | 9,000 m3 | +0.0% |
| 2011 | 9,000 m3 | +0.0% |
| 2012 | 9,000 m3 | +0.0% |
| 2013 | 9,000 m3 | +0.0% |
| 2014 | 9,000 m3 | +0.0% |
| 2015 | 9,000 m3 | +0.0% |
| 2016 | 9,000 m3 | +0.0% |
| 2017 | 9,000 m3 | +0.0% |
| 2018 | 9,000 m3 | +0.0% |
| 2019 | 9,000 m3 | +0.0% |
| 2020 | 9,000 m3 | +0.0% |
| 2021 | 9,000 m3 | +0.0% |
| 2022 | 9,000 m3 | +0.0% |
| 2023 | 9,000 m3 | +0.0% |
| 2024 | 9,000 m3 | +0.0% |
Fiji compared with similar countries
- Fiji's 9,000 m3 is above the median for upper middle income countries, which is 568 m3, 15.8× the median. (55 countries reporting)
- Fiji's 9,000 m3 is above the median for East Asia & Pacific, which is 3,500 m3, 2.6× the median. (32 countries reporting)
Biggest year-on-year movements
Years where Veneer sheets — Production in Fiji changed far more than this series normally does. A large move can be a real event or a change in how the figure was measured — the source note below says who published it.
| Year | Change | From | To |
|---|---|---|---|
| 1971 | +225.0% | 400 m3 | 1,300 m3 |
| 1975 | +207.7% | 2,600 m3 | 8,000 m3 |
| 1997 | +192.0% | 2,183 m3 | 6,375 m3 |
| 1973 | +170.0% | 1,000 m3 | 2,700 m3 |
| 2005 | +123.1% | 8,000 m3 | 17,849 m3 |
| 2002 | +66.7% | 3,000 m3 | 5,000 m3 |
Averages by decade
| Decade | Average | Lowest | Highest | Years |
|---|---|---|---|---|
| 1970s | 4,500 m3 | 400 m3 | 8,000 m3 | 10 |
| 1980s | 11,190 m3 | 7,000 m3 | 15,000 m3 | 10 |
| 1990s | 7,639 m3 | 2,183 m3 | 11,004 m3 | 10 |
| 2000s | 9,685 m3 | 3,000 m3 | 17,849 m3 | 10 |
| 2010s | 9,000 m3 | 9,000 m3 | 9,000 m3 | 10 |
| 2020s | 9,000 m3 | 9,000 m3 | 9,000 m3 | 5 |
Countries ranked near Fiji
- 83 Liberia 10,000 m3 compare
- 83 Syrian Arab Republic 10,000 m3 compare
- 83 Syria 10,000 m3 compare
- 87 Bosnia and Herzegovina 8,974 m3 compare
- 88 Bolivia (Plurinational State of) 8,000 m3 compare
- 89 Austria 7,500 m3 compare
More environment data for Fiji
- Standard Deviation, annual growth rate 0 % change on previous year (2025)
- Standard Deviation 0.219 °C (2025)
- Temperature change 1.31 °C (2025)
- Wood-based panels — Production, annual growth rate 0 % change on previous year (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), annual 3.85 % change on previous year (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), per unit 0 Mt CO2e per US$ of GDP (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), per capita 0 Mt CO2e per person (2024)
- Methane (CH4) emissions from Agriculture (Mt CO2e), annual growth rate 2.25 % change on previous year (2024)
- Methane (CH4) emissions from Agriculture (Mt CO2e), per unit of GDP 0 Mt CO2e per US$ of GDP (2024)
- Methane (CH4) emissions from Agriculture (Mt CO2e), per capita 0 Mt CO2e per person (2024)
Frequently asked questions
- What is veneer sheets — production in Fiji?
- Veneer sheets — production in Fiji was 9,000 m3 in 2024, according to Food and Agriculture Organization of the United Nations.
- What is the highest veneer sheets — production recorded in Fiji?
- The highest recorded value was 17,849 m3 in 2005.
- What is the lowest veneer sheets — production recorded in Fiji?
- The lowest recorded value was 400 m3 in 1970.
- How does Fiji rank for veneer sheets — production?
- Fiji ranks 86th out of 248 countries with data for 2024.
- Is veneer sheets — production rising or falling in Fiji?
- Over the last ten years it is unchanged. The long-run trend across the full record is rising.
- Where does this Fiji data come from?
- The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Production. Statizoid updates them automatically from the source API.
Download this data
CSV · JSON — 55 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).
About this data
The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en