Veneer sheets — Production in France

France: Veneer sheets — Production was 157,000 m3 in 2024. ▲ Rising

Latest (2024)
157,000 m3
Change on year
unchanged
World rank
31st
of 248 countries
All-time high
157,000 m3
in 2017
All-time low
52,000 m3
in 1976
Years of data
64
1961–2024

Veneer sheets — Production in France, 1961–2024

50.0k75.0k100.0k125.0k150.0k196119922024

Source: Food and Agriculture Organization of the United Nations. Measured in m3.

Analysis

In 2024, veneer sheets — production in France stood at 157,000 m3. That is the highest value across all 64 years on record.

Compared with earlier readings it is up 69.7% over ten years.

Over the whole period, veneer sheets — production in France peaked at 157,000 m3 in 2017 and was at its lowest, 52,000 m3, in 1976.

France ranks 31st of 248 countries on this measure, in the top quarter.

The long-run direction has been consistently rising across the 64 years of available data.

Veneer sheets — Production in France, year by year

Annual values for Veneer sheets — Production in France, 1961 to 2024.
Year m3 Change
1961 61,000 m3 —
1962 61,000 m3 +0.0%
1963 57,000 m3 -6.6%
1964 63,400 m3 +11.2%
1965 66,800 m3 +5.4%
1966 70,900 m3 +6.1%
1967 69,200 m3 -2.4%
1968 62,400 m3 -9.8%
1969 77,400 m3 +24.0%
1970 67,800 m3 -12.4%
1971 67,300 m3 -0.7%
1972 68,600 m3 +1.9%
1973 74,400 m3 +8.5%
1974 84,400 m3 +13.4%
1975 52,500 m3 -37.8%
1976 52,000 m3 -1.0%
1977 52,000 m3 +0.0%
1978 58,000 m3 +11.5%
1979 58,000 m3 +0.0%
1980 58,000 m3 +0.0%
1981 58,000 m3 +0.0%
1982 58,000 m3 +0.0%
1983 58,000 m3 +0.0%
1984 58,000 m3 +0.0%
1985 58,000 m3 +0.0%
1986 58,000 m3 +0.0%
1987 58,000 m3 +0.0%
1988 58,000 m3 +0.0%
1989 58,000 m3 +0.0%
1990 58,000 m3 +0.0%
1991 58,000 m3 +0.0%
1992 58,000 m3 +0.0%
1993 58,000 m3 +0.0%
1994 154,000 m3 +165.5%
1995 113,000 m3 -26.6%
1996 123,000 m3 +8.8%
1997 140,000 m3 +13.8%
1998 148,770 m3 +6.3%
1999 150,220 m3 +1.0%
2000 151,000 m3 +0.5%
2001 139,000 m3 -7.9%
2002 126,000 m3 -9.4%
2003 84,000 m3 -33.3%
2004 61,000 m3 -27.4%
2005 71,000 m3 +16.4%
2006 76,000 m3 +7.0%
2007 68,547 m3 -9.8%
2008 62,661 m3 -8.6%
2009 53,911 m3 -14.0%
2010 56,440 m3 +4.7%
2011 58,303 m3 +3.3%
2012 59,231 m3 +1.6%
2013 73,497 m3 +24.1%
2014 92,541 m3 +25.9%
2015 121,000 m3 +30.8%
2016 121,000 m3 +0.0%
2017 157,000 m3 +29.8%
2018 157,000 m3 +0.0%
2019 157,000 m3 +0.0%
2020 157,000 m3 +0.0%
2021 157,000 m3 +0.0%
2022 157,000 m3 +0.0%
2023 157,000 m3 +0.0%
2024 157,000 m3 +0.0%

France compared with similar countries

  • France's 157,000 m3 is above the median for Europe & Central Asia, which is 5,500 m3, 28.5× the median. (52 countries reporting)

Biggest year-on-year movements

Years where Veneer sheets — Production in France changed far more than this series normally does. A large move can be a real event or a change in how the figure was measured — the source note below says who published it.

YearChange FromTo
1994 +165.5% 58,000 m3 154,000 m3
1975 -37.8% 84,400 m3 52,500 m3
2003 -33.3% 126,000 m3 84,000 m3
2015 +30.8% 92,541 m3 121,000 m3
2017 +29.8% 121,000 m3 157,000 m3
2004 -27.4% 84,000 m3 61,000 m3

Averages by decade

DecadeAverage LowestHighest Years
1960s 65,456 m3 57,000 m3 77,400 m3 9
1970s 63,500 m3 52,000 m3 84,400 m3 10
1980s 58,000 m3 58,000 m3 58,000 m3 10
1990s 106,099 m3 58,000 m3 154,000 m3 10
2000s 89,312 m3 53,911 m3 151,000 m3 10
2010s 105,301 m3 56,440 m3 157,000 m3 10
2020s 157,000 m3 157,000 m3 157,000 m3 5

Countries ranked near France

  1. 29 Malaysia 206,473 m3 compare
  2. 30 United Republic of Tanzania 180,000 m3 compare
  3. 32 Estonia 145,000 m3 compare
  4. 33 Melanesia 137,000 m3 compare
  5. 34 Romania 125,720 m3 compare

See the full ranking of 278 places →

More environment data for France

All data for France →

Frequently asked questions

What is veneer sheets — production in France?
Veneer sheets — production in France was 157,000 m3 in 2024, according to Food and Agriculture Organization of the United Nations.
What is the highest veneer sheets — production recorded in France?
The highest recorded value was 157,000 m3 in 2017.
What is the lowest veneer sheets — production recorded in France?
The lowest recorded value was 52,000 m3 in 1976.
How does France rank for veneer sheets — production?
France ranks 31st out of 248 countries with data for 2024.
Is veneer sheets — production rising or falling in France?
Over the last ten years it is up 69.7%. The long-run trend across the full record is rising.
Where does this France data come from?
The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Production. Statizoid updates them automatically from the source API.

Download this data

CSV · JSON — 64 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).

Share, cite or embed this page

Cite this page

Veneer sheets — Production in France. Statizoid, drawing on Food and Agriculture Organization of the United Nations. Retrieved 27 September 2026, from https://environment.statizoid.com/stat/veneer-sheets-production/france/

Embed or link this data

Paste this into a page to link back to these figures. The data itself is free to reuse under CC BY-NC-SA 3.0 IGO (FAO); please keep the attribution.

<a href="https://environment.statizoid.com/stat/veneer-sheets-production/france/">Veneer sheets — Production in France</a> — Statizoid

About this data

Indicator
Veneer sheets — Production
Unit
m3
Source
Food and Agriculture Organization of the United Nations
Licence
CC BY-NC-SA 3.0 IGO (FAO)
Coverage
278 places, 9,227 data points, 1961–2024
Last refreshed

The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en