Veneer sheets — Production in Guatemala
Guatemala: Veneer sheets — Production was 33,300 m3 in 2024. ◆ Volatile
Veneer sheets — Production in Guatemala, 1973–2024
Source: Food and Agriculture Organization of the United Nations. Measured in m3.
Analysis
The most recent figure for veneer sheets — production in Guatemala is 33,300 m3, measured in 2024. That is the highest value across all 52 years on record.
Compared with earlier readings it is up 66.5% over ten years.
Over the whole period, veneer sheets — production in Guatemala peaked at 33,300 m3 in 2023 and was at its lowest, 200 m3, in 1986.
Guatemala ranks 57th of 248 countries on this measure, in the top quarter.
The series is highly variable year to year, so single readings are best treated with caution.
Veneer sheets — Production in Guatemala, year by year
| Year | m3 | Change |
|---|---|---|
| 1973 | 2,000 m3 | — |
| 1974 | 4,600 m3 | +130.0% |
| 1975 | 1,600 m3 | -65.2% |
| 1976 | 2,000 m3 | +25.0% |
| 1977 | 1,000 m3 | -50.0% |
| 1978 | 2,000 m3 | +100.0% |
| 1979 | 2,300 m3 | +15.0% |
| 1980 | 2,300 m3 | +0.0% |
| 1981 | 1,000 m3 | -56.5% |
| 1982 | 900 m3 | -10.0% |
| 1983 | 900 m3 | +0.0% |
| 1984 | 1,000 m3 | +11.1% |
| 1985 | 1,000 m3 | +0.0% |
| 1986 | 200 m3 | -80.0% |
| 1987 | 200 m3 | +0.0% |
| 1988 | 2,000 m3 | +900.0% |
| 1989 | 2,000 m3 | +0.0% |
| 1990 | 3,000 m3 | +50.0% |
| 1991 | 5,000 m3 | +66.7% |
| 1992 | 5,000 m3 | +0.0% |
| 1993 | 17,000 m3 | +240.0% |
| 1994 | 17,400 m3 | +2.4% |
| 1995 | 18,600 m3 | +6.9% |
| 1996 | 18,600 m3 | +0.0% |
| 1997 | 18,600 m3 | +0.0% |
| 1998 | 18,600 m3 | +0.0% |
| 1999 | 18,600 m3 | +0.0% |
| 2000 | 19,000 m3 | +2.2% |
| 2001 | 19,000 m3 | +0.0% |
| 2002 | 19,000 m3 | +0.0% |
| 2003 | 19,000 m3 | +0.0% |
| 2004 | 19,000 m3 | +0.0% |
| 2005 | 20,000 m3 | +5.3% |
| 2006 | 20,000 m3 | +0.0% |
| 2007 | 20,000 m3 | +0.0% |
| 2008 | 20,000 m3 | +0.0% |
| 2009 | 20,000 m3 | +0.0% |
| 2010 | 20,000 m3 | +0.0% |
| 2011 | 20,000 m3 | +0.0% |
| 2012 | 20,000 m3 | +0.0% |
| 2013 | 20,000 m3 | +0.0% |
| 2014 | 20,000 m3 | +0.0% |
| 2015 | 20,000 m3 | +0.0% |
| 2016 | 20,000 m3 | +0.0% |
| 2017 | 21,980 m3 | +9.9% |
| 2018 | 22,950 m3 | +4.4% |
| 2019 | 22,950 m3 | +0.0% |
| 2020 | 7,950 m3 | -65.4% |
| 2021 | 9,380 m3 | +18.0% |
| 2022 | 5,940 m3 | -36.7% |
| 2023 | 33,300 m3 | +460.6% |
| 2024 | 33,300 m3 | +0.0% |
Guatemala compared with similar countries
- Guatemala's 33,300 m3 is above the median for upper middle income countries, which is 568 m3, 58.6× the median. (55 countries reporting)
Averages by decade
| Decade | Average | Lowest | Highest | Years |
|---|---|---|---|---|
| 1970s | 2,214 m3 | 1,000 m3 | 4,600 m3 | 7 |
| 1980s | 1,150 m3 | 200 m3 | 2,300 m3 | 10 |
| 1990s | 14,040 m3 | 3,000 m3 | 18,600 m3 | 10 |
| 2000s | 19,500 m3 | 19,000 m3 | 20,000 m3 | 10 |
| 2010s | 20,788 m3 | 20,000 m3 | 22,950 m3 | 10 |
| 2020s | 17,974 m3 | 5,940 m3 | 33,300 m3 | 5 |
Countries ranked near Guatemala
More environment data for Guatemala
- Historical exposure to drought — Land soil moisture anomaly -4.45 Percentage change (2025)
- Historical exposure to drought — Cropland soil moisture anomaly -5.02 Percentage change (2025)
- Standard Deviation, annual growth rate 0 % change on previous year (2025)
- Standard Deviation 0.273 °C (2025)
- Temperature change 1.47 °C (2025)
- Wood-based panels — Production, annual growth rate 14.71 % change on previous year (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), annual 1.11 % change on previous year (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), per unit 0 Mt CO2e per US$ of GDP (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), per capita 0 Mt CO2e per person (2024)
- Methane (CH4) emissions from Agriculture (Mt CO2e), annual growth rate 0 % change on previous year (2024)
Frequently asked questions
- What is veneer sheets — production in Guatemala?
- Veneer sheets — production in Guatemala was 33,300 m3 in 2024, according to Food and Agriculture Organization of the United Nations.
- What is the highest veneer sheets — production recorded in Guatemala?
- The highest recorded value was 33,300 m3 in 2023.
- What is the lowest veneer sheets — production recorded in Guatemala?
- The lowest recorded value was 200 m3 in 1986.
- How does Guatemala rank for veneer sheets — production?
- Guatemala ranks 57th out of 248 countries with data for 2024.
- Is veneer sheets — production rising or falling in Guatemala?
- Over the last ten years it is up 66.5%. The long-run trend across the full record is volatile.
- Where does this Guatemala data come from?
- The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Production. Statizoid updates them automatically from the source API.
Download this data
CSV · JSON — 52 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).
About this data
The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en