Veneer sheets — Production in Australia
Australia: Veneer sheets — Production was 115,000 m3 in 2024. ◆ Volatile
Veneer sheets — Production in Australia, 1961–2024
Source: Food and Agriculture Organization of the United Nations. Measured in m3.
Analysis
Australia recorded 115,000 m3 for veneer sheets — production in 2024.
Compared with earlier readings it is down 5.7% over ten years.
Over the whole period, veneer sheets — production in Australia peaked at 132,000 m3 in 2011 and was at its lowest, 1,000 m3, in 2003.
Australia ranks 35th of 248 countries on this measure, in the top quarter.
The series is highly variable year to year, so single readings are best treated with caution.
Veneer sheets — Production in Australia, year by year
| Year | m3 | Change |
|---|---|---|
| 1961 | 29,300 m3 | — |
| 1962 | 26,100 m3 | -10.9% |
| 1963 | 36,200 m3 | +38.7% |
| 1964 | 29,900 m3 | -17.4% |
| 1965 | 31,700 m3 | +6.0% |
| 1966 | 34,800 m3 | +9.8% |
| 1967 | 29,400 m3 | -15.5% |
| 1968 | 31,700 m3 | +7.8% |
| 1969 | 32,400 m3 | +2.2% |
| 1970 | 35,400 m3 | +9.3% |
| 1971 | 17,700 m3 | -50.0% |
| 1972 | 14,000 m3 | -20.9% |
| 1973 | 12,900 m3 | -7.9% |
| 1974 | 13,400 m3 | +3.9% |
| 1975 | 44,000 m3 | +228.4% |
| 1976 | 31,000 m3 | -29.5% |
| 1977 | 26,000 m3 | -16.1% |
| 1978 | 23,000 m3 | -11.5% |
| 1979 | 25,000 m3 | +8.7% |
| 1980 | 28,000 m3 | +12.0% |
| 1981 | 29,000 m3 | +3.6% |
| 1982 | 29,000 m3 | +0.0% |
| 1983 | 29,000 m3 | +0.0% |
| 1984 | 29,000 m3 | +0.0% |
| 1985 | 29,000 m3 | +0.0% |
| 1986 | 29,000 m3 | +0.0% |
| 1987 | 29,000 m3 | +0.0% |
| 1988 | 29,000 m3 | +0.0% |
| 1989 | 29,000 m3 | +0.0% |
| 1990 | 29,000 m3 | +0.0% |
| 1991 | 29,000 m3 | +0.0% |
| 1992 | 29,000 m3 | +0.0% |
| 1993 | 29,000 m3 | +0.0% |
| 1994 | 29,000 m3 | +0.0% |
| 1995 | 29,000 m3 | +0.0% |
| 1996 | 29,000 m3 | +0.0% |
| 1997 | 5,000 m3 | -82.8% |
| 1998 | 5,000 m3 | +0.0% |
| 1999 | 5,000 m3 | +0.0% |
| 2000 | 5,000 m3 | +0.0% |
| 2001 | 5,000 m3 | +0.0% |
| 2002 | 5,000 m3 | +0.0% |
| 2003 | 1,000 m3 | -80.0% |
| 2004 | 5,000 m3 | +400.0% |
| 2005 | 4,000 m3 | -20.0% |
| 2006 | 4,000 m3 | +0.0% |
| 2007 | 2,000 m3 | -50.0% |
| 2008 | 82,000 m3 | +4000.0% |
| 2009 | 117,000 m3 | +42.7% |
| 2010 | 123,000 m3 | +5.1% |
| 2011 | 132,000 m3 | +7.3% |
| 2012 | 122,000 m3 | -7.6% |
| 2013 | 122,000 m3 | +0.0% |
| 2014 | 122,000 m3 | +0.0% |
| 2015 | 122,000 m3 | +0.0% |
| 2016 | 122,000 m3 | +0.0% |
| 2017 | 122,000 m3 | +0.0% |
| 2018 | 122,000 m3 | +0.0% |
| 2019 | 122,500 m3 | +0.4% |
| 2020 | 110,500 m3 | -9.8% |
| 2021 | 112,000 m3 | +1.4% |
| 2022 | 115,000 m3 | +2.7% |
| 2023 | 115,000 m3 | +0.0% |
| 2024 | 115,000 m3 | +0.0% |
Australia compared with similar countries
- Australia's 115,000 m3 is above the median for East Asia & Pacific, which is 3,500 m3, 32.9× the median. (32 countries reporting)
Biggest year-on-year movements
Years where Veneer sheets — Production in Australia changed far more than this series normally does. A large move can be a real event or a change in how the figure was measured — the source note below says who published it.
| Year | Change | From | To |
|---|---|---|---|
| 2008 | +4000.0% | 2,000 m3 | 82,000 m3 |
| 2004 | +400.0% | 1,000 m3 | 5,000 m3 |
| 1975 | +228.4% | 13,400 m3 | 44,000 m3 |
| 1997 | -82.8% | 29,000 m3 | 5,000 m3 |
| 2003 | -80.0% | 5,000 m3 | 1,000 m3 |
| 1971 | -50.0% | 35,400 m3 | 17,700 m3 |
Averages by decade
| Decade | Average | Lowest | Highest | Years |
|---|---|---|---|---|
| 1960s | 31,278 m3 | 26,100 m3 | 36,200 m3 | 9 |
| 1970s | 24,240 m3 | 12,900 m3 | 44,000 m3 | 10 |
| 1980s | 28,900 m3 | 28,000 m3 | 29,000 m3 | 10 |
| 1990s | 21,800 m3 | 5,000 m3 | 29,000 m3 | 10 |
| 2000s | 23,000 m3 | 1,000 m3 | 117,000 m3 | 10 |
| 2010s | 123,150 m3 | 122,000 m3 | 132,000 m3 | 10 |
| 2020s | 113,500 m3 | 110,500 m3 | 115,000 m3 | 5 |
Countries ranked near Australia
More environment data for Australia
- Historical exposure to drought — Land soil moisture anomaly -4.75 Percentage change (2025)
- Historical exposure to drought — Cropland soil moisture anomaly -5.98 Percentage change (2025)
- Standard Deviation, annual growth rate 0 % change on previous year (2025)
- Standard Deviation 0.345 °C (2025)
- Temperature change 1.4 °C (2025)
- Wood-based panels — Production, annual growth rate -1.03 % change on previous year (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), annual 0.6708 % change on previous year (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), per unit 0 Mt CO2e per US$ of GDP (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), per capita 0 Mt CO2e per person (2024)
- Methane (CH4) emissions from Agriculture (Mt CO2e), annual growth rate 0.0861 % change on previous year (2024)
Frequently asked questions
- What is veneer sheets — production in Australia?
- Veneer sheets — production in Australia was 115,000 m3 in 2024, according to Food and Agriculture Organization of the United Nations.
- What is the highest veneer sheets — production recorded in Australia?
- The highest recorded value was 132,000 m3 in 2011.
- What is the lowest veneer sheets — production recorded in Australia?
- The lowest recorded value was 1,000 m3 in 2003.
- How does Australia rank for veneer sheets — production?
- Australia ranks 35th out of 248 countries with data for 2024.
- Is veneer sheets — production rising or falling in Australia?
- Over the last ten years it is down 5.7%. The long-run trend across the full record is volatile.
- Where does this Australia data come from?
- The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Production. Statizoid updates them automatically from the source API.
Download this data
CSV · JSON — 64 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).
About this data
The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en