Veneer sheets — Production in Cameroon

Cameroon: Veneer sheets — Production was 91,000 m3 in 2024. ▲ Rising

Latest (2024)
91,000 m3
Change on year
unchanged
World rank
38th
of 248 countries
All-time high
96,000 m3
in 2019
All-time low
12,000 m3
in 1961
Years of data
64
1961–2024

Veneer sheets — Production in Cameroon, 1961–2024

20.0k40.0k60.0k80.0k100.0k196119922024

Source: Food and Agriculture Organization of the United Nations. Measured in m3.

Analysis

In 2024, veneer sheets — production in Cameroon stood at 91,000 m3.

Compared with earlier readings it is up 212.2% over ten years.

Over the whole period, veneer sheets — production in Cameroon peaked at 96,000 m3 in 2019 and was at its lowest, 12,000 m3, in 1961.

Cameroon ranks 38th of 248 countries on this measure, in the top quarter.

The long-run direction has been consistently rising across the 64 years of available data.

Veneer sheets — Production in Cameroon, year by year

Annual values for Veneer sheets — Production in Cameroon, 1961 to 2024.
Year m3 Change
1961 12,000 m3 —
1962 12,500 m3 +4.2%
1963 18,400 m3 +47.2%
1964 24,600 m3 +33.7%
1965 20,400 m3 -17.1%
1966 19,000 m3 -6.9%
1967 24,000 m3 +26.3%
1968 30,000 m3 +25.0%
1969 30,000 m3 +0.0%
1970 30,000 m3 +0.0%
1971 30,000 m3 +0.0%
1972 50,300 m3 +67.7%
1973 62,800 m3 +24.9%
1974 62,800 m3 +0.0%
1975 62,800 m3 +0.0%
1976 63,000 m3 +0.3%
1977 63,000 m3 +0.0%
1978 63,000 m3 +0.0%
1979 63,000 m3 +0.0%
1980 63,000 m3 +0.0%
1981 50,000 m3 -20.6%
1982 50,000 m3 +0.0%
1983 50,000 m3 +0.0%
1984 50,000 m3 +0.0%
1985 44,000 m3 -12.0%
1986 45,000 m3 +2.3%
1987 31,000 m3 -31.1%
1988 29,000 m3 -6.5%
1989 32,000 m3 +10.3%
1990 32,000 m3 +0.0%
1991 32,000 m3 +0.0%
1992 32,000 m3 +0.0%
1993 31,000 m3 -3.1%
1994 31,000 m3 +0.0%
1995 31,000 m3 +0.0%
1996 31,000 m3 +0.0%
1997 61,000 m3 +96.8%
1998 59,000 m3 -3.3%
1999 53,000 m3 -10.2%
2000 70,000 m3 +32.1%
2001 55,000 m3 -21.4%
2002 53,200 m3 -3.3%
2003 49,900 m3 -6.2%
2004 47,300 m3 -5.2%
2005 68,000 m3 +43.8%
2006 61,000 m3 -10.3%
2007 85,000 m3 +39.3%
2008 79,000 m3 -7.1%
2009 62,000 m3 -21.5%
2010 52,949 m3 -14.6%
2011 44,400 m3 -16.1%
2012 37,710 m3 -15.1%
2013 32,733 m3 -13.2%
2014 29,147 m3 -11.0%
2015 36,000 m3 +23.5%
2016 44,978 m3 +24.9%
2017 55,872 m3 +24.2%
2018 76,140 m3 +36.3%
2019 96,000 m3 +26.1%
2020 71,000 m3 -26.0%
2021 71,000 m3 +0.0%
2022 91,000 m3 +28.2%
2023 91,000 m3 +0.0%
2024 91,000 m3 +0.0%

Cameroon compared with similar countries

  • Cameroon's 91,000 m3 is above the median for lower middle income countries, which is 3,000 m3, 30.3× the median. (44 countries reporting)
  • Cameroon's 91,000 m3 is above the median for Sub-Saharan Africa, which is 1,000 m3, 91.0× the median. (45 countries reporting)

Biggest year-on-year movements

Years where Veneer sheets — Production in Cameroon changed far more than this series normally does. A large move can be a real event or a change in how the figure was measured — the source note below says who published it.

YearChange FromTo
1997 +96.8% 31,000 m3 61,000 m3
1972 +67.7% 30,000 m3 50,300 m3

Averages by decade

DecadeAverage LowestHighest Years
1960s 21,211 m3 12,000 m3 30,000 m3 9
1970s 55,070 m3 30,000 m3 63,000 m3 10
1980s 44,400 m3 29,000 m3 63,000 m3 10
1990s 39,300 m3 31,000 m3 61,000 m3 10
2000s 63,040 m3 47,300 m3 85,000 m3 10
2010s 50,593 m3 29,147 m3 96,000 m3 10
2020s 83,000 m3 71,000 m3 91,000 m3 5

Countries ranked near Cameroon

  1. 35 Australia 115,000 m3 compare
  2. 36 Germany 112,492 m3 compare
  3. 37 New Zealand 101,000 m3 compare
  4. 38 Chile 91,000 m3 compare
  5. 40 Denmark 79,760 m3 compare
  6. 41 Papua New Guinea 76,000 m3 compare

See the full ranking of 278 places →

More environment data for Cameroon

All data for Cameroon →

Frequently asked questions

What is veneer sheets — production in Cameroon?
Veneer sheets — production in Cameroon was 91,000 m3 in 2024, according to Food and Agriculture Organization of the United Nations.
What is the highest veneer sheets — production recorded in Cameroon?
The highest recorded value was 96,000 m3 in 2019.
What is the lowest veneer sheets — production recorded in Cameroon?
The lowest recorded value was 12,000 m3 in 1961.
How does Cameroon rank for veneer sheets — production?
Cameroon ranks 38th out of 248 countries with data for 2024.
Is veneer sheets — production rising or falling in Cameroon?
Over the last ten years it is up 212.2%. The long-run trend across the full record is rising.
Where does this Cameroon data come from?
The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Production. Statizoid updates them automatically from the source API.

Download this data

CSV · JSON — 64 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).

Share, cite or embed this page

Cite this page

Veneer sheets — Production in Cameroon. Statizoid, drawing on Food and Agriculture Organization of the United Nations. Retrieved 27 September 2026, from https://environment.statizoid.com/stat/veneer-sheets-production/cameroon/

Embed or link this data

Paste this into a page to link back to these figures. The data itself is free to reuse under CC BY-NC-SA 3.0 IGO (FAO); please keep the attribution.

<a href="https://environment.statizoid.com/stat/veneer-sheets-production/cameroon/">Veneer sheets — Production in Cameroon</a> — Statizoid

About this data

Indicator
Veneer sheets — Production
Unit
m3
Source
Food and Agriculture Organization of the United Nations
Licence
CC BY-NC-SA 3.0 IGO (FAO)
Coverage
278 places, 9,227 data points, 1961–2024
Last refreshed

The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en