Veneer sheets — Production in Congo

Congo: Veneer sheets — Production was 29,000 m3 in 2024. ▼ Falling

Latest (2024)
29,000 m3
Change on year
unchanged
World rank
62nd
of 248 countries
All-time high
96,000 m3
in 1973
All-time low
2,224 m3
in 2006
Years of data
64
1961–2024

Veneer sheets — Production in Congo, 1961–2024

020.0k40.0k60.0k80.0k100.0k196119922024

Source: Food and Agriculture Organization of the United Nations. Measured in m3.

Analysis

The most recent figure for veneer sheets — production in Congo is 29,000 m3, measured in 2024.

That represents a change of down 50.8% over ten years.

Over the whole period, veneer sheets — production in Congo peaked at 96,000 m3 in 1973 and was at its lowest, 2,224 m3, in 2006.

Congo ranks 62nd of 248 countries on this measure, in the top quarter.

The long-run direction has been consistently falling across the 64 years of available data.

Veneer sheets — Production in Congo, year by year

Annual values for Veneer sheets — Production in Congo, 1961 to 2024.
Year m3 Change
1961 9,000 m3 —
1962 8,600 m3 -4.4%
1963 21,900 m3 +154.7%
1964 21,900 m3 +0.0%
1965 39,000 m3 +78.1%
1966 37,700 m3 -3.3%
1967 53,900 m3 +43.0%
1968 59,600 m3 +10.6%
1969 74,600 m3 +25.2%
1970 66,700 m3 -10.6%
1971 66,500 m3 -0.3%
1972 91,100 m3 +37.0%
1973 96,000 m3 +5.4%
1974 71,000 m3 -26.0%
1975 43,000 m3 -39.4%
1976 55,000 m3 +27.9%
1977 72,000 m3 +30.9%
1978 78,000 m3 +8.3%
1979 70,000 m3 -10.3%
1980 75,000 m3 +7.1%
1981 68,000 m3 -9.3%
1982 63,000 m3 -7.4%
1983 74,000 m3 +17.5%
1984 63,000 m3 -14.9%
1985 59,000 m3 -6.3%
1986 51,000 m3 -13.6%
1987 49,000 m3 -3.9%
1988 56,000 m3 +14.3%
1989 52,000 m3 -7.1%
1990 60,000 m3 +15.4%
1991 36,000 m3 -40.0%
1992 35,000 m3 -2.8%
1993 35,000 m3 +0.0%
1994 47,000 m3 +34.3%
1995 49,000 m3 +4.3%
1996 50,000 m3 +2.0%
1997 76,000 m3 +52.0%
1998 52,000 m3 -31.6%
1999 19,000 m3 -63.5%
2000 10,000 m3 -47.4%
2001 14,000 m3 +40.0%
2002 22,500 m3 +60.7%
2003 26,100 m3 +16.0%
2004 8,000 m3 -69.3%
2005 14,000 m3 +75.0%
2006 2,224 m3 -84.1%
2007 45,986 m3 +1967.7%
2008 31,537 m3 -31.4%
2009 33,000 m3 +4.6%
2010 35,000 m3 +6.1%
2011 34,000 m3 -2.9%
2012 46,000 m3 +35.3%
2013 73,000 m3 +58.7%
2014 59,000 m3 -19.2%
2015 59,490 m3 +0.8%
2016 64,490 m3 +8.4%
2017 54,297 m3 -15.8%
2018 46,450 m3 -14.5%
2019 51,665 m3 +11.2%
2020 27,986 m3 -45.8%
2021 27,986 m3 +0.0%
2022 29,000 m3 +3.6%
2023 29,000 m3 +0.0%
2024 29,000 m3 +0.0%

Congo compared with similar countries

  • Congo's 29,000 m3 is above the median for lower middle income countries, which is 3,000 m3, 9.7× the median. (44 countries reporting)
  • Congo's 29,000 m3 is above the median for Sub-Saharan Africa, which is 1,000 m3, 29.0× the median. (45 countries reporting)

Biggest year-on-year movements

Years where Veneer sheets — Production in Congo changed far more than this series normally does. A large move can be a real event or a change in how the figure was measured — the source note below says who published it.

YearChange FromTo
2007 +1967.7% 2,224 m3 45,986 m3
1963 +154.7% 8,600 m3 21,900 m3

Averages by decade

DecadeAverage LowestHighest Years
1960s 36,244 m3 8,600 m3 74,600 m3 9
1970s 70,930 m3 43,000 m3 96,000 m3 10
1980s 61,000 m3 49,000 m3 75,000 m3 10
1990s 45,900 m3 19,000 m3 76,000 m3 10
2000s 20,735 m3 2,224 m3 45,986 m3 10
2010s 52,339 m3 34,000 m3 73,000 m3 10
2020s 28,594 m3 27,986 m3 29,000 m3 5

Countries ranked near Congo

  1. 59 Serbia 32,000 m3 compare
  2. 60 Spain 31,097 m3 compare
  3. 61 China, Taiwan Province of 30,000 m3 compare
  4. 63 Czechia 28,000 m3 compare
  5. 64 South Africa 27,000 m3 compare
  6. 65 Italy 23,965 m3 compare

See the full ranking of 278 places →

More environment data for Congo

All data for Congo →

Frequently asked questions

What is veneer sheets — production in Congo?
Veneer sheets — production in Congo was 29,000 m3 in 2024, according to Food and Agriculture Organization of the United Nations.
What is the highest veneer sheets — production recorded in Congo?
The highest recorded value was 96,000 m3 in 1973.
What is the lowest veneer sheets — production recorded in Congo?
The lowest recorded value was 2,224 m3 in 2006.
How does Congo rank for veneer sheets — production?
Congo ranks 62nd out of 248 countries with data for 2024.
Is veneer sheets — production rising or falling in Congo?
Over the last ten years it is down 50.8%. The long-run trend across the full record is falling.
Where does this Congo data come from?
The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Production. Statizoid updates them automatically from the source API.

Download this data

CSV · JSON — 64 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).

Share, cite or embed this page

Cite this page

Veneer sheets — Production in Congo. Statizoid, drawing on Food and Agriculture Organization of the United Nations. Retrieved 27 September 2026, from https://environment.statizoid.com/stat/veneer-sheets-production/congo-rep/

Embed or link this data

Paste this into a page to link back to these figures. The data itself is free to reuse under CC BY-NC-SA 3.0 IGO (FAO); please keep the attribution.

<a href="https://environment.statizoid.com/stat/veneer-sheets-production/congo-rep/">Veneer sheets — Production in Congo</a> — Statizoid

About this data

Indicator
Veneer sheets — Production
Unit
m3
Source
Food and Agriculture Organization of the United Nations
Licence
CC BY-NC-SA 3.0 IGO (FAO)
Coverage
278 places, 9,227 data points, 1961–2024
Last refreshed

The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en