Veneer sheets — Production in Czechia
Czechia: Veneer sheets — Production was 28,000 m3 in 2024. ▲ Rising
Veneer sheets — Production in Czechia, 1993–2024
Source: Food and Agriculture Organization of the United Nations. Measured in m3.
Analysis
The most recent figure for veneer sheets — production in Czechia is 28,000 m3, measured in 2024.
That represents a change of up 3.7% on the previous year and down 6.7% over ten years.
Over the whole period, veneer sheets — production in Czechia peaked at 37,000 m3 in 2010 and was at its lowest, 8,000 m3, in 1994.
Czechia ranks 63rd of 248 countries on this measure, in the middle of the range.
The long-run direction has been consistently rising across the 32 years of available data.
Veneer sheets — Production in Czechia, year by year
| Year | m3 | Change |
|---|---|---|
| 1993 | 13,000 m3 | — |
| 1994 | 8,000 m3 | -38.5% |
| 1995 | 9,000 m3 | +12.5% |
| 1996 | 9,000 m3 | +0.0% |
| 1997 | 8,000 m3 | -11.1% |
| 1998 | 12,000 m3 | +50.0% |
| 1999 | 12,000 m3 | +0.0% |
| 2000 | 11,000 m3 | -8.3% |
| 2001 | 15,000 m3 | +36.4% |
| 2002 | 14,000 m3 | -6.7% |
| 2003 | 17,000 m3 | +21.4% |
| 2004 | 19,000 m3 | +11.8% |
| 2005 | 19,000 m3 | +0.0% |
| 2006 | 19,000 m3 | +0.0% |
| 2007 | 19,000 m3 | +0.0% |
| 2008 | 16,000 m3 | -15.8% |
| 2009 | 32,000 m3 | +100.0% |
| 2010 | 37,000 m3 | +15.6% |
| 2011 | 30,000 m3 | -18.9% |
| 2012 | 30,000 m3 | +0.0% |
| 2013 | 28,000 m3 | -6.7% |
| 2014 | 30,000 m3 | +7.1% |
| 2015 | 28,000 m3 | -6.7% |
| 2016 | 24,200 m3 | -13.6% |
| 2017 | 24,660 m3 | +1.9% |
| 2018 | 27,000 m3 | +9.5% |
| 2019 | 28,002 m3 | +3.7% |
| 2020 | 29,000 m3 | +3.6% |
| 2021 | 30,000 m3 | +3.4% |
| 2022 | 28,000 m3 | -6.7% |
| 2023 | 27,000 m3 | -3.6% |
| 2024 | 28,000 m3 | +3.7% |
Czechia compared with similar countries
- Czechia's 28,000 m3 is above the median for Europe & Central Asia, which is 5,500 m3, 5.1× the median. (52 countries reporting)
Biggest year-on-year movements
Years where Veneer sheets — Production in Czechia changed far more than this series normally does. A large move can be a real event or a change in how the figure was measured — the source note below says who published it.
| Year | Change | From | To |
|---|---|---|---|
| 2009 | +100.0% | 16,000 m3 | 32,000 m3 |
Averages by decade
| Decade | Average | Lowest | Highest | Years |
|---|---|---|---|---|
| 1990s | 10,143 m3 | 8,000 m3 | 13,000 m3 | 7 |
| 2000s | 18,100 m3 | 11,000 m3 | 32,000 m3 | 10 |
| 2010s | 28,686 m3 | 24,200 m3 | 37,000 m3 | 10 |
| 2020s | 28,400 m3 | 27,000 m3 | 30,000 m3 | 5 |
Countries ranked near Czechia
More environment data for Czechia
- Historical exposure to drought — Land soil moisture anomaly -2.82 Percentage change (2025)
- Historical exposure to drought — Cropland soil moisture anomaly -2.99 Percentage change (2025)
- Standard Deviation, annual growth rate 0 % change on previous year (2025)
- Standard Deviation 0.63 °C (2025)
- Temperature change 1.97 °C (2025)
- Wood-based panels — Production, annual growth rate -0.4193 % change on previous year (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), annual -7.77 % change on previous year (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), per unit 0 Mt CO2e per US$ of GDP (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), per capita 0 Mt CO2e per person (2024)
- Methane (CH4) emissions from Agriculture (Mt CO2e), annual growth rate -0.1206 % change on previous year (2024)
Frequently asked questions
- What is veneer sheets — production in Czechia?
- Veneer sheets — production in Czechia was 28,000 m3 in 2024, according to Food and Agriculture Organization of the United Nations.
- What is the highest veneer sheets — production recorded in Czechia?
- The highest recorded value was 37,000 m3 in 2010.
- What is the lowest veneer sheets — production recorded in Czechia?
- The lowest recorded value was 8,000 m3 in 1994.
- How does Czechia rank for veneer sheets — production?
- Czechia ranks 63rd out of 248 countries with data for 2024.
- Is veneer sheets — production rising or falling in Czechia?
- Over the last ten years it is down 6.7%. The long-run trend across the full record is rising.
- Where does this Czechia data come from?
- The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Production. Statizoid updates them automatically from the source API.
Download this data
CSV · JSON — 32 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).
About this data
The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en