Veneer sheets — Production in Indonesia

Indonesia: Veneer sheets — Production was 1.15 million m3 in 2024. ◆ Volatile

Latest (2024)
1.15 million m3
Change on year
unchanged
World rank
8th
of 248 countries
All-time high
1.44 million m3
in 2021
All-time low
30,000 m3
in 1989
Years of data
42
1983–2024

Veneer sheets — Production in Indonesia, 1983–2024

0500.0k1.0M1.5M1983200320241983: 74.0k m31984: 89.6k m31985: 91.1k m31986: 101.5k m31987: 53.9k m31988: 50.0k m31989: 30.0k m31990: 56.0k m31991: 50.0k m31992: 55.0k m31993: 55.0k m31994: 50.0k m31995: 50.0k m31996: 50.0k m31997: 50.0k m31998: 50.0k m31999: 50.0k m32000: 69.0k m32001: 94.0k m32002: 116.0k m32003: 289.0k m32004: 155.0k m32005: 155.0k m32006: 256.0k m32007: 299.0k m32008: 427.0k m32009: 685.0k m32010: 737.0k m32011: 816.0k m32012: 816.0k m32013: 762.0k m32014: 761.0k m32015: 761.1k m32016: 774.0k m32017: 774.0k m32018: 1.3M m32019: 1.4M m32020: 1.4M m32021: 1.4M m32022: 1.4M m32023: 1.2M m32024: 1.2M m3

Source: Food and Agriculture Organization of the United Nations. Measured in m3.

Analysis

The most recent figure for veneer sheets — production in Indonesia is 1.15 million m3, measured in 2024.

Compared with earlier readings it is up 51.3% over ten years.

Over the whole period, veneer sheets — production in Indonesia peaked at 1.44 million m3 in 2021 and was at its lowest, 30,000 m3, in 1989.

That places Indonesia 8th out of 248 countries with data for 2024, putting it in the top 10%.

The series is highly variable year to year, so single readings are best treated with caution.

Veneer sheets — Production in Indonesia, year by year

Annual values for Veneer sheets — Production in Indonesia, 1983 to 2024.
Year m3 Change
1983 74,000 m3 —
1984 89,600 m3 +21.1%
1985 91,100 m3 +1.7%
1986 101,500 m3 +11.4%
1987 53,900 m3 -46.9%
1988 50,000 m3 -7.2%
1989 30,000 m3 -40.0%
1990 56,000 m3 +86.7%
1991 50,000 m3 -10.7%
1992 55,000 m3 +10.0%
1993 55,000 m3 +0.0%
1994 50,000 m3 -9.1%
1995 50,000 m3 +0.0%
1996 50,000 m3 +0.0%
1997 50,000 m3 +0.0%
1998 50,000 m3 +0.0%
1999 50,000 m3 +0.0%
2000 69,000 m3 +38.0%
2001 94,000 m3 +36.2%
2002 116,000 m3 +23.4%
2003 289,000 m3 +149.1%
2004 155,000 m3 -46.4%
2005 155,000 m3 +0.0%
2006 256,000 m3 +65.2%
2007 299,000 m3 +16.8%
2008 427,000 m3 +42.8%
2009 685,000 m3 +60.4%
2010 736,981 m3 +7.6%
2011 815,981 m3 +10.7%
2012 815,981 m3 +0.0%
2013 762,000 m3 -6.6%
2014 761,000 m3 -0.1%
2015 761,051 m3 +0.0%
2016 774,000 m3 +1.7%
2017 774,000 m3 +0.0%
2018 1.31 million m3 +69.1%
2019 1.40 million m3 +6.9%
2020 1.42 million m3 +1.2%
2021 1.44 million m3 +1.7%
2022 1.36 million m3 -5.5%
2023 1.15 million m3 -15.4%
2024 1.15 million m3 +0.0%

Indonesia compared with similar countries

  • Indonesia's 1.15 million m3 is above the median for upper middle income countries, which is 568 m3, 2027.3× the median. (55 countries reporting)
  • Indonesia's 1.15 million m3 is above the median for East Asia & Pacific, which is 3,500 m3, 329.0× the median. (32 countries reporting)

Biggest year-on-year movements

Years where Veneer sheets — Production in Indonesia changed far more than this series normally does. A large move can be a real event or a change in how the figure was measured — the source note below says who published it.

YearChange FromTo
2003 +149.1% 116,000 m3 289,000 m3
1990 +86.7% 30,000 m3 56,000 m3
2018 +69.1% 774,000 m3 1.31 million m3

Averages by decade

DecadeAverage LowestHighest Years
1980s 70,014 m3 30,000 m3 101,500 m3 7
1990s 51,600 m3 50,000 m3 56,000 m3 10
2000s 254,500 m3 69,000 m3 685,000 m3 10
2010s 890,906 m3 736,981 m3 1.40 million m3 10
2020s 1.30 million m3 1.15 million m3 1.44 million m3 5

Countries ranked near Indonesia

  1. 6 Russian Federation 1.58 million m3 compare
  2. 6 Russia 1.58 million m3 compare
  3. 9 Gabon 610,000 m3 compare
  4. 10 Mexico 606,000 m3 compare
  5. 11 Canada 581,480 m3 compare

See the full ranking of 278 places →

More environment data for Indonesia

All data for Indonesia →

Frequently asked questions

What is veneer sheets — production in Indonesia?
Veneer sheets — production in Indonesia was 1.15 million m3 in 2024, according to Food and Agriculture Organization of the United Nations.
What is the highest veneer sheets — production recorded in Indonesia?
The highest recorded value was 1.44 million m3 in 2021.
What is the lowest veneer sheets — production recorded in Indonesia?
The lowest recorded value was 30,000 m3 in 1989.
How does Indonesia rank for veneer sheets — production?
Indonesia ranks 8th out of 248 countries with data for 2024.
Is veneer sheets — production rising or falling in Indonesia?
Over the last ten years it is up 51.3%. The long-run trend across the full record is volatile.
Where does this Indonesia data come from?
The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Production. Statizoid updates them automatically from the source API.

Download this data

CSV · JSON — 42 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).

Share, cite or embed this page

Cite this page

Veneer sheets — Production in Indonesia. Statizoid, drawing on Food and Agriculture Organization of the United Nations. Retrieved 27 September 2026, from https://environment.statizoid.com/stat/veneer-sheets-production/indonesia/

Embed or link this data

Paste this into a page to link back to these figures. The data itself is free to reuse under CC BY-NC-SA 3.0 IGO (FAO); please keep the attribution.

<a href="https://environment.statizoid.com/stat/veneer-sheets-production/indonesia/">Veneer sheets — Production in Indonesia</a> — Statizoid

About this data

Indicator
Veneer sheets — Production
Unit
m3
Source
Food and Agriculture Organization of the United Nations
Licence
CC BY-NC-SA 3.0 IGO (FAO)
Coverage
278 places, 9,227 data points, 1961–2024
Last refreshed

The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en