What is the highest veneer sheets — production recorded in Least Developed Countries (LDCs)?

The highest recorded value was 1.24 million m3 in 2024.

What is the lowest veneer sheets — production recorded in Least Developed Countries (LDCs)?

The lowest recorded value was 25,200 m3 in 1982.

How does Least Developed Countries (LDCs) rank for veneer sheets — production?

Least Developed Countries (LDCs) ranks 13th out of 33 groups with data for 2024.

Is veneer sheets — production rising or falling in Least Developed Countries (LDCs)?

Over the last ten years it is up 388.9%. The long-run trend across the full record is volatile.

Where does this Least Developed Countries (LDCs) data come from?

The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Production. Statizoid updates them automatically from the source API.

Veneer sheets — Production in Least Developed Countries (LDCs)

Name: Veneer sheets — Production in Least Developed Countries (LDCs)
Creator: Food and Agriculture Organization of the United Nations
License: CC BY-NC-SA 3.0 IGO (FAO)

Least Developed Countries (LDCs): Veneer sheets — Production was 1.24 million m3 in 2024. ◆ Volatile

Latest (2024)

1.24 million m3

Change on year

up 0.8%

Rank

13th

of 33 groups

All-time high

1.24 million m3

in 2024

All-time low

25,200 m3

in 1982

Years of data

1961–2024

Veneer sheets — Production in Least Developed Countries (LDCs), 1961–2024

Source: Food and Agriculture Organization of the United Nations. Measured in m3.

Analysis

In 2024, veneer sheets — production in Least Developed Countries (LDCs) stood at 1.24 million m3. That is the highest value across all 64 years on record.

That represents a change of up 0.8% on the previous year and up 388.9% over ten years.

Over the whole period, veneer sheets — production in Least Developed Countries (LDCs) peaked at 1.24 million m3 in 2024 and was at its lowest, 25,200 m3, in 1982.

Least Developed Countries (LDCs) ranks 13th of 33 groups on this measure, in the middle of the range.

The series is highly variable year to year, so single readings are best treated with caution.

Averages by decade

Decade	Average	Lowest	Highest	Years
1960s	56,878 m3	34,100 m3	111,600 m3	9
1970s	63,740 m3	29,900 m3	103,300 m3	10
1980s	37,560 m3	25,200 m3	52,200 m3	10
1990s	78,040 m3	27,150 m3	201,600 m3	10
2000s	138,660 m3	41,800 m3	185,800 m3	10
2010s	336,888 m3	184,800 m3	526,112 m3	10
2020s	908,416 m3	510,035 m3	1.24 million m3	5

Countries ranked near Least Developed Countries (LDCs)

10 Uganda 501,000 m3 compare
11 Côte d'Ivoire 405,908 m3 compare
12 USSR 400,000 m3 compare
13 Türkiye 348,936 m3 compare
14 Myanmar 310,000 m3 compare
15 Thailand 300,000 m3 compare
16 India 291,038 m3 compare

See the full ranking of 264 places →

More environment data for Least Developed Countries (LDCs)

Standard Deviation 0.229 °C (2025)
Temperature change 1.29 °C (2025)
Agriculture — Area 836,181 1000 ha (2024)
Nutrient potash K2O (total) — Use per capita 0.82 kg/cap (2024)
Nutrient potash K2O (total) — Use per value of agricultural production 3.21 g/Int$ (2024)
Country area — Area 2.08 million 1000 ha (2024)
Land area — Area 2.04 million 1000 ha (2024)
Cropland — Share in Land area 11 % (2024)
Cropland — Share in Agricultural land 26.79 % (2024)
Cropland — Area 223,929 1000 ha (2024)

All data for Least Developed Countries (LDCs) →

Frequently asked questions

What is veneer sheets — production in Least Developed Countries (LDCs)?: Veneer sheets — production in Least Developed Countries (LDCs) was 1.24 million m3 in 2024, according to Food and Agriculture Organization of the United Nations.
What is the highest veneer sheets — production recorded in Least Developed Countries (LDCs)?: The highest recorded value was 1.24 million m3 in 2024.
What is the lowest veneer sheets — production recorded in Least Developed Countries (LDCs)?: The lowest recorded value was 25,200 m3 in 1982.
How does Least Developed Countries (LDCs) rank for veneer sheets — production?: Least Developed Countries (LDCs) ranks 13th out of 33 groups with data for 2024.
Is veneer sheets — production rising or falling in Least Developed Countries (LDCs)?: Over the last ten years it is up 388.9%. The long-run trend across the full record is volatile.
Where does this Least Developed Countries (LDCs) data come from?: The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Production. Statizoid updates them automatically from the source API.

Download this data

CSV · JSON — 64 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).

About this data

Indicator: Veneer sheets — Production
Unit: m3
Source: Food and Agriculture Organization of the United Nations
Licence: CC BY-NC-SA 3.0 IGO (FAO)
Coverage: 264 places, 8,827 data points, 1961–2024
Last refreshed: 13 August 2026

The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en