Veneer sheets — Production in Northern America

Northern America: Veneer sheets — Production was 2.78 million m3 in 2024. ◆ Volatile

Latest (2024)
2.78 million m3
Change on year
up 6.9%
Rank
7th
of 30 groups
All-time high
2.87 million m3
in 2020
All-time low
93,200 m3
in 1961
Years of data
64
1961–2024

Veneer sheets — Production in Northern America, 1961–2024

01.0M2.0M3.0M196119922024

Source: Food and Agriculture Organization of the United Nations. Measured in m3.

Analysis

The most recent figure for veneer sheets — production in Northern America is 2.78 million m3, measured in 2024.

That represents a change of up 6.9% on the previous year and up 202.0% over ten years.

Over the whole period, veneer sheets — production in Northern America peaked at 2.87 million m3 in 2020 and was at its lowest, 93,200 m3, in 1961.

That places Northern America 7th out of 30 groups with data for 2024, putting it in the top quarter.

The series is highly variable year to year, so single readings are best treated with caution.

Veneer sheets — Production in Northern America, year by year

Annual values for Veneer sheets — Production in Northern America, 1961 to 2024.
Year m3 Change
1961 93,200 m3 —
1962 122,200 m3 +31.1%
1963 154,100 m3 +26.1%
1964 163,400 m3 +6.0%
1965 141,600 m3 -13.3%
1966 231,900 m3 +63.8%
1967 217,400 m3 -6.3%
1968 227,600 m3 +4.7%
1969 186,000 m3 -18.3%
1970 220,000 m3 +18.3%
1971 174,000 m3 -20.9%
1972 209,000 m3 +20.1%
1973 197,000 m3 -5.7%
1974 226,000 m3 +14.7%
1975 353,000 m3 +56.2%
1976 474,000 m3 +34.3%
1977 474,000 m3 +0.0%
1978 474,000 m3 +0.0%
1979 474,000 m3 +0.0%
1980 474,000 m3 +0.0%
1981 474,000 m3 +0.0%
1982 650,000 m3 +37.1%
1983 750,000 m3 +15.4%
1984 700,000 m3 -6.7%
1985 700,000 m3 +0.0%
1986 750,000 m3 +7.1%
1987 474,000 m3 -36.8%
1988 474,000 m3 +0.0%
1989 474,000 m3 +0.0%
1990 501,000 m3 +5.7%
1991 501,000 m3 +0.0%
1992 591,000 m3 +18.0%
1993 581,000 m3 -1.7%
1994 581,000 m3 +0.0%
1995 581,000 m3 +0.0%
1996 581,000 m3 +0.0%
1997 581,000 m3 +0.0%
1998 801,000 m3 +37.9%
1999 801,000 m3 +0.0%
2000 900,000 m3 +12.4%
2001 1.00 million m3 +11.1%
2002 1.10 million m3 +10.0%
2003 1.10 million m3 +0.0%
2004 1.26 million m3 +14.5%
2005 1.28 million m3 +1.6%
2006 1.30 million m3 +1.6%
2007 1.00 million m3 -23.1%
2008 900,000 m3 -10.0%
2009 850,000 m3 -5.6%
2010 850,000 m3 +0.0%
2011 900,000 m3 +5.9%
2012 950,000 m3 +5.6%
2013 1.00 million m3 +5.3%
2014 920,000 m3 -8.0%
2015 1.01 million m3 +9.8%
2016 1.07 million m3 +5.9%
2017 2.86 million m3 +166.9%
2018 2.85 million m3 -0.3%
2019 2.81 million m3 -1.3%
2020 2.87 million m3 +1.9%
2021 2.87 million m3 +0.0%
2022 2.87 million m3 +0.0%
2023 2.60 million m3 -9.3%
2024 2.78 million m3 +6.9%

Biggest year-on-year movements

Years where Veneer sheets — Production in Northern America changed far more than this series normally does. A large move can be a real event or a change in how the figure was measured — the source note below says who published it.

YearChange FromTo
2017 +166.9% 1.07 million m3 2.86 million m3
1966 +63.8% 141,600 m3 231,900 m3
1975 +56.2% 226,000 m3 353,000 m3

Averages by decade

DecadeAverage LowestHighest Years
1960s 170,822 m3 93,200 m3 231,900 m3 9
1970s 327,500 m3 174,000 m3 474,000 m3 10
1980s 592,000 m3 474,000 m3 750,000 m3 10
1990s 610,000 m3 501,000 m3 801,000 m3 10
2000s 1.07 million m3 850,000 m3 1.30 million m3 10
2010s 1.52 million m3 850,000 m3 2.86 million m3 10
2020s 2.79 million m3 2.60 million m3 2.87 million m3 5

Countries ranked near Northern America

  1. 4 Viet Nam 2.05 million m3 compare
  2. 4 Vietnam 2.05 million m3 compare
  3. 6 Russian Federation 1.58 million m3 compare
  4. 6 Russia 1.58 million m3 compare
  5. 8 Indonesia 1.15 million m3 compare
  6. 9 Gabon 610,000 m3 compare
  7. 10 Mexico 606,000 m3 compare

See the full ranking of 278 places →

More environment data for Northern America

All data for Northern America →

Frequently asked questions

What is veneer sheets — production in Northern America?
Veneer sheets — production in Northern America was 2.78 million m3 in 2024, according to Food and Agriculture Organization of the United Nations.
What is the highest veneer sheets — production recorded in Northern America?
The highest recorded value was 2.87 million m3 in 2020.
What is the lowest veneer sheets — production recorded in Northern America?
The lowest recorded value was 93,200 m3 in 1961.
How does Northern America rank for veneer sheets — production?
Northern America ranks 7th out of 30 groups with data for 2024.
Is veneer sheets — production rising or falling in Northern America?
Over the last ten years it is up 202.0%. The long-run trend across the full record is volatile.
Where does this Northern America data come from?
The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Production. Statizoid updates them automatically from the source API.

Download this data

CSV · JSON — 64 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).

Share, cite or embed this page

Cite this page

Veneer sheets — Production in Northern America. Statizoid, drawing on Food and Agriculture Organization of the United Nations. Retrieved 27 September 2026, from https://environment.statizoid.com/stat/veneer-sheets-production/northern-america/

Embed or link this data

Paste this into a page to link back to these figures. The data itself is free to reuse under CC BY-NC-SA 3.0 IGO (FAO); please keep the attribution.

<a href="https://environment.statizoid.com/stat/veneer-sheets-production/northern-america/">Veneer sheets — Production in Northern America</a> — Statizoid

About this data

Indicator
Veneer sheets — Production
Unit
m3
Source
Food and Agriculture Organization of the United Nations
Licence
CC BY-NC-SA 3.0 IGO (FAO)
Coverage
278 places, 9,227 data points, 1961–2024
Last refreshed

The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en