Veneer sheets — Production in Thailand
Thailand: Veneer sheets — Production was 300,000 m3 in 2024. ◆ Volatile
Veneer sheets — Production in Thailand, 1961–2024
Source: Food and Agriculture Organization of the United Nations. Measured in m3.
Analysis
In 2024, veneer sheets — production in Thailand stood at 300,000 m3. That is the highest value across all 64 years on record.
The figure is up 62.2% over ten years.
Over the whole period, veneer sheets — production in Thailand peaked at 300,000 m3 in 2021 and was at its lowest, 2,000 m3, in 1961.
Thailand ranks 20th of 248 countries on this measure, in the top 10%.
The series is highly variable year to year, so single readings are best treated with caution.
Veneer sheets — Production in Thailand, year by year
| Year | m3 | Change |
|---|---|---|
| 1961 | 2,000 m3 | — |
| 1962 | 4,000 m3 | +100.0% |
| 1963 | 4,500 m3 | +12.5% |
| 1964 | 5,100 m3 | +13.3% |
| 1965 | 4,900 m3 | -3.9% |
| 1966 | 5,300 m3 | +8.2% |
| 1967 | 6,600 m3 | +24.5% |
| 1968 | 7,600 m3 | +15.2% |
| 1969 | 8,700 m3 | +14.5% |
| 1970 | 7,600 m3 | -12.6% |
| 1971 | 8,300 m3 | +9.2% |
| 1972 | 12,100 m3 | +45.8% |
| 1973 | 12,800 m3 | +5.8% |
| 1974 | 12,800 m3 | +0.0% |
| 1975 | 9,000 m3 | -29.7% |
| 1976 | 11,000 m3 | +22.2% |
| 1977 | 13,000 m3 | +18.2% |
| 1978 | 11,000 m3 | -15.4% |
| 1979 | 22,800 m3 | +107.3% |
| 1980 | 22,500 m3 | -1.3% |
| 1981 | 23,000 m3 | +2.2% |
| 1982 | 15,000 m3 | -34.8% |
| 1983 | 15,000 m3 | +0.0% |
| 1984 | 50,000 m3 | +233.3% |
| 1985 | 17,000 m3 | -66.0% |
| 1986 | 10,000 m3 | -41.2% |
| 1987 | 21,000 m3 | +110.0% |
| 1988 | 21,000 m3 | +0.0% |
| 1989 | 21,000 m3 | +0.0% |
| 1990 | 136,000 m3 | +547.6% |
| 1991 | 154,000 m3 | +13.2% |
| 1992 | 71,200 m3 | -53.8% |
| 1993 | 71,700 m3 | +0.7% |
| 1994 | 14,000 m3 | -80.5% |
| 1995 | 8,000 m3 | -42.9% |
| 1996 | 8,000 m3 | +0.0% |
| 1997 | 2,000 m3 | -75.0% |
| 1998 | 2,000 m3 | +0.0% |
| 1999 | 3,000 m3 | +50.0% |
| 2000 | 145,000 m3 | +4733.3% |
| 2001 | 150,000 m3 | +3.4% |
| 2002 | 155,000 m3 | +3.3% |
| 2003 | 160,000 m3 | +3.2% |
| 2004 | 165,000 m3 | +3.1% |
| 2005 | 175,000 m3 | +6.1% |
| 2006 | 180,000 m3 | +2.9% |
| 2007 | 185,000 m3 | +2.8% |
| 2008 | 185,000 m3 | +0.0% |
| 2009 | 185,000 m3 | +0.0% |
| 2010 | 185,000 m3 | +0.0% |
| 2011 | 185,000 m3 | +0.0% |
| 2012 | 185,000 m3 | +0.0% |
| 2013 | 185,000 m3 | +0.0% |
| 2014 | 185,000 m3 | +0.0% |
| 2015 | 185,000 m3 | +0.0% |
| 2016 | 185,000 m3 | +0.0% |
| 2017 | 185,000 m3 | +0.0% |
| 2018 | 185,000 m3 | +0.0% |
| 2019 | 185,000 m3 | +0.0% |
| 2020 | 185,000 m3 | +0.0% |
| 2021 | 300,000 m3 | +62.2% |
| 2022 | 300,000 m3 | +0.0% |
| 2023 | 300,000 m3 | +0.0% |
| 2024 | 300,000 m3 | +0.0% |
Thailand compared with similar countries
- Thailand's 300,000 m3 is above the median for upper middle income countries, which is 568 m3, 528.2× the median. (55 countries reporting)
- Thailand's 300,000 m3 is above the median for East Asia & Pacific, which is 3,500 m3, 85.7× the median. (32 countries reporting)
Biggest year-on-year movements
Years where Veneer sheets — Production in Thailand changed far more than this series normally does. A large move can be a real event or a change in how the figure was measured — the source note below says who published it.
| Year | Change | From | To |
|---|---|---|---|
| 2000 | +4733.3% | 3,000 m3 | 145,000 m3 |
| 1990 | +547.6% | 21,000 m3 | 136,000 m3 |
| 1984 | +233.3% | 15,000 m3 | 50,000 m3 |
| 1987 | +110.0% | 10,000 m3 | 21,000 m3 |
| 1979 | +107.3% | 11,000 m3 | 22,800 m3 |
| 1962 | +100.0% | 2,000 m3 | 4,000 m3 |
Averages by decade
| Decade | Average | Lowest | Highest | Years |
|---|---|---|---|---|
| 1960s | 5,411 m3 | 2,000 m3 | 8,700 m3 | 9 |
| 1970s | 12,040 m3 | 7,600 m3 | 22,800 m3 | 10 |
| 1980s | 21,550 m3 | 10,000 m3 | 50,000 m3 | 10 |
| 1990s | 46,990 m3 | 2,000 m3 | 154,000 m3 | 10 |
| 2000s | 168,500 m3 | 145,000 m3 | 185,000 m3 | 10 |
| 2010s | 185,000 m3 | 185,000 m3 | 185,000 m3 | 10 |
| 2020s | 277,000 m3 | 185,000 m3 | 300,000 m3 | 5 |
Countries ranked near Thailand
More environment data for Thailand
- Historical exposure to drought — Land soil moisture anomaly 1.44 Percentage change (2025)
- Historical exposure to drought — Cropland soil moisture anomaly 1.54 Percentage change (2025)
- Standard Deviation, annual growth rate 0 % change on previous year (2025)
- Standard Deviation 0.306 °C (2025)
- Temperature change 1.01 °C (2025)
- Wood-based panels — Production, annual growth rate 8.48 % change on previous year (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), annual 2.85 % change on previous year (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), per unit 0 Mt CO2e per US$ of GDP (2024)
- Total greenhouse gas emissions excluding LULUCF (Mt CO2e), per capita 0 Mt CO2e per person (2024)
- Methane (CH4) emissions from Agriculture (Mt CO2e), annual growth rate 0.1009 % change on previous year (2024)
Frequently asked questions
- What is veneer sheets — production in Thailand?
- Veneer sheets — production in Thailand was 300,000 m3 in 2024, according to Food and Agriculture Organization of the United Nations.
- What is the highest veneer sheets — production recorded in Thailand?
- The highest recorded value was 300,000 m3 in 2021.
- What is the lowest veneer sheets — production recorded in Thailand?
- The lowest recorded value was 2,000 m3 in 1961.
- How does Thailand rank for veneer sheets — production?
- Thailand ranks 20th out of 248 countries with data for 2024.
- Is veneer sheets — production rising or falling in Thailand?
- Over the last ten years it is up 62.2%. The long-run trend across the full record is volatile.
- Where does this Thailand data come from?
- The figures come from Food and Agriculture Organization of the United Nations, published as part of Veneer sheets — Production. Statizoid updates them automatically from the source API.
Download this data
CSV · JSON — 64 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).
About this data
The database contains data on the production and trade in roundwood and in primary wood and paper products for all countries and territories in the world.The main types of primary forest products included in this database are roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further and defined in the Joint Forest Sector Questionnaire (JFSQ) (https://www.fao.org/statistics/data-collection/forestry/en). The database contains details of the following topics: - roundwood removals (production) by coniferous and non-coniferous wood and assortments, - production and trade in industrial roundwood, sawnwood, wood-based panels, wood charcoal, pulp, paper and paperboard, and other products. More detailed information on wood products, including definitions, can be found at: https://www.fao.org/statistics/data-collection/forestry/en